- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Conductive Carbon Filled
- Isoflon PTFE + 15% Graphite Polytetrafluoroethylene with 15% Graphite
Isoflon PTFE + 15% Graphite Polytetrafluoroethylene with 15% Graphite
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Conductive Carbon Filled |
| Manufacturer | Isoflon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Isoflon PTFE + 15% Graphite Polytetrafluoroethylene with 15% Graphite.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Properties:Good thermal conductivityLow coefficient of frictionLow permeabilityApplications: Non-lubricated dynamic seals.Information provided by Isoflon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.14 - 2.19 g/cc | 2.14 - 2.19 g/cc | ASTM D792 |
| Deformation | 5.0 - 6.0 % @Time 86400 sec |
5.0 - 6.0 % @Time 24.0 hour |
Permanent, after Relaxation; ASTM D695 |
| 10 - 12 % @Time 86400 sec, Pressure 13.7 MPa |
10 - 12 % @Time 24.0 hour, Pressure 1990 psi |
Under Load; ASTM D695 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 - 60 | 55 - 60 | ASTM D2240 |
| Tensile Strength | 18.0 - 23.0 MPa | 2610 - 3340 psi | ASTM D4894 |
| Elongation at Break | 200 - 250 % | 200 - 250 % | ASTM D4894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 260 °C | 500 °F | |
| Minimum Service Temperature, Air | -200 °C | -328 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+7 ohm-cm | 1.00e+7 ohm-cm | ASTM D257 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Ageing and Weatherability | Stable over 20 years of exposure |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPO 1047-2000 GRAPHITE
- XX Phenolic Laminate
- Lord Adhesives Thermosetâ„¢ UR-340 Two Component Urethane Encapsulant
- Mitsubishi Xantar® MX 1071 FD Polycarbonate
- Teknor Apex APEX® 4855-LF Polyvinyl Chloride, Flexible
- Polyplastics Duranex® 702MS Polybutylene Terephthalate (PBT), Higher gloss, Better surface appearance, GF filled
- 3M 966 Adhesive Transfer Tapes with Adhesive 100
- BNZ Materials 460 Insulating Cement
- 3M Novec™ Electronic Degreaser
Copyright © lookpolymers.com All Rights Reserved