- HOME
- POLYMER SEARCH
- Thermoplastic
- Saint-Gobain Meldin® 3110 Thermoplastic Bearing Material
Saint-Gobain Meldin® 3110 Thermoplastic Bearing Material
| Category | Polymer , Thermoplastic |
| Manufacturer | Saint-Gobain Perfomance Plastics |
| Trade Name | Meldin® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Saint-Gobain Meldin® 3110 Thermoplastic Bearing Material.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
3110 has a very low coefficient of friction and is particularly well suited for use with soft mating surface materials such as aluminum and soft stainless steel. Meldin® 3100 materials have excellent mechanical properties, in tension and compression, and maintain an impressive level of these attributes as operating temperatures increase. These properties add extreme strength and rigidity to component parts, even in narrow cross-sections.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 85 | 85 | ASTM D785 |
| Hardness, Shore D | 80 | 80 | ASTM D2240 |
| Tensile Strength | 54.3 MPa | 7880 psi | ASTM D638 |
| Elongation at Yield | 7.5 % | 7.5 % | ASTM D638 |
| Tensile Modulus | 1.18 GPa | 171 ksi | ASTM D 638 |
| Flexural Strength | 82.4 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 3.18 GPa | 461 ksi | ASTM D790 |
| Compressive Strength | 100 MPa | 14500 psi | ASTM D695 |
| Compressive Modulus | 1.78 GPa @Temperature 23.0 °C |
258 ksi @Temperature 73.4 °F |
ASTM D695 |
| Izod Impact, Notched | 0.203 J/cm | 0.380 ft-lb/in | ASTM D256 |
| Coefficient of Friction | 0.20 | 0.20 | Saint-Gobain |
| K (wear) Factor | 11.95 x 10-8 mm³/N-M | 5.932 x 10-10 in³-min/ft-lb-hr | ASTM D3702 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 39.0 µm/m-°C | 21.7 µin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 214 °C | 417 °F | ASTM D648 |
| Glass Transition Temp, Tg | 233 °C | 451 °F |
Users viewing this material also viewed the following:
- Multibase Multi-Pro® 1008 T Polypropylene
- Polimeri Europa Clearflex® MQ B0 Very Low Density Polyethylene
- Nilit FRIANYL A63 KV35 Nylon 6.6 for injection molding, 35% glass ball reinforced
- UBE UBESTA® 3030U Nylon 12 (After Nitric Acid (10%) for 500 hours)
- A. Schulman POLYFORT™ FPP 1902HU Talc Fortified Polypropylene
- Polyram PlusTek PB300G3 Nylon 6, 15% Glass Fiber
- Chosun Refractories CUN-669 Nozzle Brick
- BASF Luranyl® KR 2403 G6 Polyphenylene Ether + Styrene-Butadiene Blend, 30% Glass Fiber Reinforced
- 3M Scotch® 255 Package Sealing Tape
- Bhansali Engineering Abstron KU670M ABS Heat Resistant
Copyright © lookpolymers.com All Rights Reserved