POLYMER SEARCH

Ineos B50-35H-176 HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Ineos Olefins & Polymers USA
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos B50-35H-176 HDPE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

B50-35H is a high density polyethylene copolymer developed for blow molding. It is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material contains a fully FDA sanctioned antistat and meets the Food and Drug Administration requirements of 21CFR.1520.

Physical Properties	Metric	English	Comments
Density	0.950 g/cc	0.0343 lb/inÂ³	ASTM D4883
Melt Flow	0.35 g/10 min @Load 2.16 kg, Temperature 190 Â°C	0.35 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ASTM D2240
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min (50 mm/min); ASTM D-638
Elongation at Break	>= 700 %	>= 700 %	2 in/min (50 mm/min); ASTM D-638
Flexural Modulus	0.690 GPa	100 ksi	ASTM D747
	1.103 GPa	160.0 ksi	Tangent-Method 1; ASTM D790
Izod Impact, Notched	1.90 J/cm	3.56 ft-lb/in	ASTM D256
Tensile Impact Strength	302 kJ/mÂ²	144 ft-lb/inÂ²	ASTM D1822

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	70.0 Â°C	158 Â°F	ASTM D648
Vicat Softening Point	130 Â°C	266 Â°F	ASTM D1525
Brittleness Temperature	<= -75.0 Â°C	<= -103 Â°F	ASTM D746

Descriptive Properties	Value	Comments
Process	Blow Molding
Region	US & Canada	Bamberger Polymers Distribution

Users viewing this material also viewed the following: