- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Molded
- Ineos ABS Lustran® SAN C Injection Molding Grade
Ineos ABS Lustran® SAN C Injection Molding Grade
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded |
| Manufacturer | Ineos ABS |
| Trade Name | Lustran® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ineos ABS Lustran® SAN C Injection Molding Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage, Transverse | 0.0030 - 0.0040 cm/cm | 0.0030 - 0.0040 in/in | Test Condition: 150x105x3; acc. ISO 2577 |
| Melt Flow | 23 g/10 min @Load 10.0 kg, Temperature 220 °C |
23 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 3.2 % | 3.2 % | 50 mm/min; ISO 527-1,-2 |
| Tensile Modulus | 3.70 GPa | 537 ksi | 1 mm/min; ISO 527-1,-2 |
| Flexural Strength | 111 MPa | 16100 psi | 2 mm/min; ISO 178 |
| Flexural Modulus | 3.80 GPa | 551 ksi | 2 mm/min; ISO 178 |
| Izod Impact, Notched (ISO) | 2.00 kJ/m² | 0.952 ft-lb/in² | ISO 180-1A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 103 °C | 217 °F | ISO 75-1,-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 101 °C | 214 °F | ISO 75-1,-2 |
| Vicat Softening Point | 104 °C @Load 5.10 kg |
219 °F @Load 11.2 lb |
50°C/hour; ISO 306 |
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
Users viewing this material also viewed the following:
- Gouda Vuurvast GOLITE 125 R GM Refractory Insulating Castable
- Industeel FORA 400 400 HB Wear Resistant Steel
- Lubriplate EMB Lithium-Polymer Type Grease For Special Applications / Conditions
- SMAC CABLE® 2519S-60-08 Damping Material
- DuPont Performance Polymers Rynite® FR543 NC010 PET
- Dow DNDA-7340 NT 7 Linear Low Density Polyethylene Resin
- Dow Nordel® IP 3430 EPDM Hydrocarbon Rubber
- Cossa Polimeri ESTABLEND PA 1030 GF HI ABS / Nylon 6 Blend, 15% Glass Filled
- Barlog Plastics KEBAFLEX SG 35 A.1 TPE-S, Shore A35, natural
- 3M 480 Polyethylene Tape
Copyright © lookpolymers.com All Rights Reserved