- HOME
- POLYMER SEARCH
- Nonferrous Metal
- Lead Alloy
- Indium Corp. Indalloy® 106 (Sn63) Sn-Pb Solder Alloy
Indium Corp. Indalloy® 106 (Sn63) Sn-Pb Solder Alloy
| Category | Metal , Nonferrous Metal , Lead Alloy , Solder/Braze Alloy , Tin Alloy |
| Manufacturer | Indium Corporation of America |
| Trade Name | Indalloy® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Indium Corp. Indalloy® 106 (Sn63) Sn-Pb Solder Alloy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Standard eutectic tin-lead solder with wide application. Not recommended against silver and/or gold.Information provided by the manufacturer, Indium Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.40 g/cc | 0.303 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Brinell | 17 | 17 | |
| Tensile Strength, Ultimate | 51.7 MPa | 7500 psi | |
| Elongation at Break | 37 % | 37 % | |
| Modulus of Elasticity | 30.0 GPa | 4350 ksi | |
| Shear Strength | 42.7 MPa | 6190 psi | Shear Bond Holding Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 25.0 µm/m-°C @Temperature 20.0 °C |
13.9 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.167 J/g-°C | 0.0399 BTU/lb-°F | Solid |
| Thermal Conductivity | 50.0 W/m-K @Temperature 85.0 °C |
347 BTU-in/hr-ft²-°F @Temperature 185 °F |
|
| Melting Point | 183 °C | 361 °F | Eutectic |
| Solidus | 183 °C | 361 °F | |
| Liquidus | 183 °C | 361 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Lead, Pb | 37 % | 37 % | |
| Tin, Sn | 63 % | 63 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000150 ohm-cm | 0.0000150 ohm-cm |
Users viewing this material also viewed the following:
- Potters Industries A-Series Premium 4MM Soda-Lime Silica Technical Quality Solid Glass Spheres
- PEAK Werkstoff DISPAL S232 Aluminum Alloy, AlSi17Fe4Cu3Mg, Condition T6
- PolyOne Geon™ Vinyl Flexible R5185A Polyvinyl Chloride, Flexible (PVC, Flexible)
- SABIC R50035 Linear Low Density Polyethylene for Rotational Molding
- Hyosung Topilene B240P PP
- Mallard Creek Polymers Rovene® 6018 Styrene-Acrylic Emulsion
- Techmer ES HiFill® HIPS GF15 15% Glass Filled
- Tipco Tipcolite® TX 211 Phenolic Compound, Wood Flour, having Medium Flow & High Electrical Properties
- Hexcel® HexWeb® HRH-327 - 3/16 - 8.0 Fiberglass Reinforced Polyimide Honeycomb
- Addiplast Addinyl B2I V25 Flame Retardant Nylon 6, 25% Glass Filled
Copyright © lookpolymers.com All Rights Reserved