- HOME
- POLYMER SEARCH
- Thermoset
- Methacrylate
- Methacrylate Adhesive
- ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive II, Straw, Black
ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive II, Straw, Black
| Category | Polymer , Adhesive , Thermoset , Methacrylate , Methacrylate Adhesive |
| Manufacturer | ITW Devcon |
| Trade Name | Plastic Welder™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive II, Straw, Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity | 56000 cP | 56000 cP | Mixed Viscosity (Thixotropic gel) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 5.0 - 15 % | 5.0 - 15 % | |
| Adhesive Bond Strength | 20.7 MPa | 3000 psi | lap shear (on grit blasted steel, bond line thickness of 0.010"); ASTM D1002 |
| Tensile Impact Strength | 35.7 kJ/m² | 17.0 ft-lb/in² | |
| Peel Strength | 2.63 - 3.51 kN/m | 15.0 - 20.0 pli |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | dry |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 15.0 - 20.0 min | 0.250 - 0.333 hour | Working time |
| 30.0 - 35.0 min | 0.500 - 0.583 hour | Fixture time | |
| 120 - 240 min | 2.00 - 4.00 hour | Functional cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Mix ratio (Resin:Hardener) | 1:1 |
Users viewing this material also viewed the following:
- PolyOne Novablend™ 6602 Polyvinyl Chloride, Rigid (PVC, Rigid)
- SABIC Innovative Plastics Lexan® FXD103R PC (Europe-Africa-Middle East)
- Solvay Specialty Polymers Halar® 1400LC Polyethylene, Chlorotrifluoroethylene (ECTFE) (Unverified Data**)
- SABIC Innovative Plastics LNP THERMOCOMP EC004XXC PEI
- Unitika A1022GFL15 PA6, 15% Glass Fiber Reinforced, Conditioned
- A. Schulman PP 828-31 Polypropylene Black Molding Grade Impact Polypropylene
- Trelleborg Emerson & Cuming Stycast® E-1000 One-Component Epoxy Low Stress Encapsulant
- ConocoPhillips ANDEROL® FGC 40 Compressor Fluid, Synthetic Food Grade ISO 100
- Arlon R30342R032 0.032" (0.813 mm) Cured Silicone Rubber
- Fainplast Compounds CKL 79 Flexible PVC, Sheathing Lead Free
Copyright © lookpolymers.com All Rights Reserved