- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane (TPUR), Polyester Grade
- Huntsman AVALON® 75 ABX Thermoplastic Polyurethane
Huntsman AVALON® 75 ABX Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyester Grade |
| Manufacturer | Huntsman Corporation |
| Trade Name | Avalon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Huntsman AVALON® 75 ABX Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Introduction: AVALON 70 ABX is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 70 ABX is part of the AVALON Perform Range and offers a specially designed, flexible material with improved slip resistance and rubber-like properties, particularly suitable for TPU/PU applications. The features offered include:Improved processing Lower density Excellent surface definition Abrasion resistance Flex resistance Phthalate free TPUInformation provided by Alliance Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 75 | 75 | DIN 53505 |
| Tensile Strength at Break | >= 25.0 MPa | >= 3630 psi | DIN 53504 |
| Elongation at Break | >= 750 % | >= 750 % | DIN 53504 |
| Tear Strength | >= 35.0 kN/m | >= 200 pli | DIN 53507 |
| Abrasion | <= 50 | <= 50 | mm<sup>3</sup>; DIN 53516 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 25.0 - 35.0 °C | 77.0 - 95.0 °F | |
| Rear Barrel Temperature | 160 - 180 °C | 320 - 356 °F | |
| Middle Barrel Temperature | 165 - 185 °C | 329 - 365 °F | |
| Front Barrel Temperature | 165 - 190 °C | 329 - 374 °F | |
| Nozzle Temperature | 160 - 185 °C | 320 - 365 °F | |
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
| Injection Pressure | 2.00 - 10.0 MPa | 290 - 1450 psi | |
| Hold Pressure | 1.00 - 5.00 MPa | 145 - 725 psi | |
| Back Pressure | 0.0300 - 0.300 MPa | 4.35 - 43.5 psi | |
| Screw Speed | 20 - 80 rpm | 20 - 80 rpm |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Compression Ratio | 2-3:1 | |
| Flex Life | >100 k cycles | DIN 53522 T3 |
| L/D Ratio | 20-25:1 | |
| Typical Screw Diameter | 40-120 nm |
Users viewing this material also viewed the following:
- Petromont 1002 High Density Polyethylene Resin
- DuPont Performance Polymers Crastin® SK605 BK851 PBT (Unverified Data**)
- GEHR Plastics ECOGEHR® PLA-LF Polylactic Acid
- Teknor Apex APEX® 3310-60 Polyvinyl Chloride, Flexible
- Teknor Apex APEX® 3707-70LG-NT Polyvinyl Chloride, Flexible
- Braskem H 306 Fiber Extrusion Polypropylene
- ACC QM 245 QSI Quantum Silicones 45 Durometer Addition Cure Moldmaking Material
- Plastcom SLOVAMID 66/6 GF 30 Polyamide 66/6, 30% Glass Fiber (discontinued **)
- Wanhua Chemical Wanthane® WHT-2195 Polycaprolactone Based TPU
- Arlon 42561R006 0.0055" (0.140 mm) Uncured Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved