- HOME
- POLYMER SEARCH
- Thermoset
- Acrylic/Cyanoacrylate Adhesive
- Humiseal 1B31LSE Acrylic Conformal Coating
Humiseal 1B31LSE Acrylic Conformal Coating
| Category | Polymer , Adhesive , Thermoset , Acrylic/Cyanoacrylate Adhesive |
| Manufacturer | Humiseal |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Humiseal 1B31LSE Acrylic Conformal Coating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Humiseal 1B31LSE Acrylic Conformal CoatingHigh moisture resistanceExcellent dielectrical propertiesSelective chemical resistanceExcellent repairabilityMIL-I-46058C Approval PendingPasses thermal shock test (MIL-I-46058C)Flammability (self extinguishing) (ASTM D635)Poor resistance to solvents (IPC CC 830)Recommended Stripper: 1080Recommended Thinner: 801 Cure Type: Room Temp or Heat
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.923 g/cc | 0.0333 lb/in³ | ASTM D1475 |
| Solids Content | 32 % | 32 % | Fed Std 141 Method 4044 |
| Volatile Organic Compounds (VOC) Content | 184 g/l | 184 g/l | |
| Viscosity | 750 cP | 750 cP | Fed Std Method 4287 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Elasticity | 0.04933 GPa | 7.154 ksi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 55.0 µm/m-°C @Temperature 20.0 °C |
30.6 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 125 °C | 257 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| Glass Transition Temp, Tg | 15.0 °C | 59.0 °F | |
| Flash Point | 16.7 °C | 62.0 °F | ASTM D56 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 6.00e+10 ohm | 6.00e+10 ohm | Moisture Resistance; MIL-I-46058C |
| Insulation Resistance | 8.00e+14 ohm | 8.00e+14 ohm | Insulation Resistance; MIL-I-46058C |
| Dielectric Constant | 2.5 | 2.5 | ASTM D1 50 65T |
| Dielectric Breakdown | >= 1500 V | >= 1500 V | Dielectric Withstand; MIL-I-46058C |
| Dissipation Factor | 0.010 | 0.010 | ASTM D1 50 65T |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 20.0 min | 0.333 hour | Dry Time to Handling; Fed Std 141 4061 |
| 30.0 min @Temperature 170 °C |
0.500 hour @Temperature 338 °F |
||
| >= 1440 min @Temperature 23.0 °C |
>= 24.0 hour @Temperature 73.4 °F |
||
| Shelf Life | 12.0 Month @Temperature 23.0 °C |
12.0 Month @Temperature 73.4 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage | 600 ft²/gal |
Users viewing this material also viewed the following:
- Rogers Corporation Poron® 4701-30-20064 P Urethane Foam, Very Soft, Supported with Clear Polyester Film
- LyondellBasell THF Tetrahydrofuran
- Solvay ANTAROX® LAEP 15 Surfactant
- Solvay DURAPHOS® DBHP Dibutyl hydrogen phosphite
- Teknor Apex Sinpolene MBW008LE Low Density Polyethylene
- Dow Corning ANTIFOAM C EMULSION, FOOD GRADE
- Clariant Renol PCSP0013WT-192 Polycarbonate, Flame Retardant, UV Stabilized, High Opacity
- BNZ Materials Bazelite 2300 LI Insulating Castable
- 3M 3311 General Purpose Aluminum Foil Tape
Copyright © lookpolymers.com All Rights Reserved