- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Phenolic/Glass Fiber SMC
- Hippe PF GC 201 Woven Glass Cloth Reinforced Phenolic Resin - Sheet
Hippe PF GC 201 Woven Glass Cloth Reinforced Phenolic Resin - Sheet
| Category | Polymer , Thermoset , Phenolic , Phenolic/Glass Fiber SMC |
| Manufacturer | Erhard Hippe KG |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hippe PF GC 201 Woven Glass Cloth Reinforced Phenolic Resin - Sheet.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Used in mechanical and electrical applications. High mechanical strength and good electrical properties under normal humidity. Heat resistant. Information provided by Hippe.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.60 - 1.80 g/cc | 1.60 - 1.80 g/cc | IEC 1212-2 8.1 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | >= 100 MPa | >= 14500 psi | IEC 1212-2 5.7 |
| Flexural Strength | >= 140 MPa | >= 20300 psi | Perpendicular to laminations; IEC 1212-2 5.1 |
| Flexural Modulus | >= 14.0 GPa | >= 2030 ksi | IEC 1212-2 5.2 |
| Izod Impact, Unnotched (ISO) | >= 29.0 kJ/m² | >= 13.8 ft-lb/in² | Parallel to laminations; IEC 1212-2 5.5.3 |
| Charpy Impact Unnotched | >= 2.50 J/cm² | >= 11.9 ft-lb/in² | Parallel to laminations; IEC 1212-2 5.5.2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Insulation Resistance | >= 1.00e+8 ohm | >= 1.00e+8 ohm | After immersion in water; IEC 1212-2 6.3 |
| Dielectric Constant | <= 5.0 @Frequency 48.0 - 62.0 Hz |
<= 5.0 @Frequency 48.0 - 62.0 Hz |
IEC 1212-2 6.2 |
| Dielectric Breakdown | >= 20000 V @Temperature 90.0 °C |
>= 20000 V @Temperature 194 °F |
In oil, parallel to laminations; IEC 1212-2 6.2 |
| Comparative Tracking Index | >= 100 V | >= 100 V | IEC 1212-2 6.4 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Thermal Endurance | 120 T.I. | IEC 1212-2 7.1 |
| Water Absorption | < 310 mg | IEC 1212-2 8.2; Test piece 50 x 50 x 10 mm |
Users viewing this material also viewed the following:
- Solvay Engineered Polymers SEQUEL® 2380 Engineered Polyolefin (discontinued **)
- Ravago Manufacturing Americas Hylon® N1020HL BK Nylon 6/6 (discontinued **)
- MetalTek MTEK 23-35WCo Heat Resistant Stainless Steel
- Inno-Comp INNOPOL® CS 1-3830 30% Glass-Fiber-Filled Polypropylene Homopolymer
- Momentive Performance Materials RTV167 Gray Adhesive Sealant, Non-Corrosive High Strength
- Gromax BFG30-DN00N1 Nylon 6 30% Glass Filled (Dry)
- Chesterton 763 Rust Transformer®
- Colorite Polymers 8512 Clear Injection Molding Vinyl Compound
- CP-Polymer-Technik Wellamid® 6600 GS 40 HWCP 40% Glass Sphere Filled Nylon 66, Heat Stabilized, Dry
- Teknor Apex Monprene® MP-2750 Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved