Hippe EP GM 201 Glass Mat Reinforced Epoxy Resin - Sheet

Category	Polymer , Thermoset , Epoxy , Epoxy, Molded, Glass Fiber Filler
Manufacturer	Erhard Hippe KG
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Hippe EP GM 201 Glass Mat Reinforced Epoxy Resin - Sheet.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Used in mechanical and electrical applications. Extremely high mechanical strength at moderate temperature. Very good electrical properties under high humidity.Information provided by Hippe.

Physical Properties	Metric	English	Comments
Specific Gravity	1.70 - 1.90 g/cc	1.70 - 1.90 g/cc	IEC 1212-2 8.1

Mechanical Properties	Metric	English	Comments
Tensile Strength	>= 250 MPa	>= 36300 psi	IEC 1212-2 5.7
Flexural Strength	>= 320 MPa	>= 46400 psi	Perpendicular to laminations; IEC 1212-2 5.1
Flexural Modulus	>= 15.0 GPa	>= 2180 ksi	IEC 1212-2 5.2
Compressive Strength	>= 350 MPa	>= 50800 psi	Perpendicular to laminations; IEC 1212-2 5.3
Shear Strength	>= 20.0 MPa	>= 2900 psi	Parallel to laminations; IEC 1212-2 5.6
Izod Impact, Unnotched (ISO)	>= 54.0 kJ/m²	>= 25.7 ft-lb/in²	Parallel to laminations; IEC 1212-2 5.5.3
Charpy Impact Unnotched	>= 5.00 J/cm²	>= 23.8 ft-lb/in²	Parallel to laminations; IEC 1212-2 5.5.2

Electrical Properties	Metric	English	Comments
Insulation Resistance	>= 5.00e+9 ohm	>= 5.00e+9 ohm	After immersion in water; IEC 1212-2 6.3
Dielectric Constant	<= 5.5 @Frequency 48.0 - 62.0 Hz	<= 5.5 @Frequency 48.0 - 62.0 Hz	IEC 1212-2 6.2
	<= 5.5 @Frequency 1.00e+6 Hz	<= 5.5 @Frequency 1.00e+6 Hz	IEC 1212-2 6.2
Dielectric Breakdown	>= 35000 V @Temperature 90.0 °C	>= 35000 V @Temperature 194 °F	In oil, parallel to laminations; IEC 1212-2 6.2
Dissipation Factor	<= 0.050 @Frequency 48.0 - 62.0 Hz	<= 0.050 @Frequency 48.0 - 62.0 Hz	IEC 1212-2 6.2
	<= 0.050 @Frequency 1.00e+6 Hz	<= 0.050 @Frequency 1.00e+6 Hz	IEC 1212-2 6.2
Comparative Tracking Index	>= 200 V	>= 200 V	IEC 1212-2 6.4

Descriptive Properties	Value	Comments
Thermal Endurance	130 T.I.	IEC 1212-2 7.1
Water Absorption	< 40 mg	IEC 1212-2 8.2; Test piece 50 x 50 x 10 mm

Users viewing this material also viewed the following: