- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylsulfone (PPSU)
- Ensinger TECASON™ P Polyphenylsulfone (PPSU)
Ensinger TECASON™ P Polyphenylsulfone (PPSU)
| Category | Polymer , Thermoplastic , Polyphenylsulfone (PPSU) |
| Manufacturer | Ensinger |
| Trade Name | TECASON™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ensinger TECASON™ P Polyphenylsulfone (PPSU).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
TECASON™ P is a polyphenylsulfone that exhibits excellent temperature, impact and chemical resistance properties.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 123 | 123 | ASTM D785 |
| Tensile Strength, Yield | 69.6 MPa | 10100 psi | ASTM D638 |
| Elongation at Break | 60 % | 60 % | ASTM D638 |
| Tensile Modulus | 2.34 GPa | 340 ksi | ASTM D638 |
| Flexural Strength | 91.0 MPa | 13200 psi | ASTM D790 |
| Flexural Modulus | 2.41 GPa | 350 ksi | ASTM D790 |
| Compressive Strength | 98.94 MPa | 14350 psi | ASTM D695 |
| Izod Impact, Unnotched | 6.94 J/cm | 13.0 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 30.6 µm/m-°C | 17.0 µin/in-°F | ASTM D696 |
| Maximum Service Temperature, Air | 182 °C | 360 °F | Intermittent |
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 216 °C | 420 °F | ASTM D648 |
| Vicat Softening Point | 218 °C | 424 °F | ASTM D1525 |
| Flammability, UL94 | V-0 | V-0 | UL 94 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.44 @Frequency 60.0 Hz |
3.44 @Frequency 60.0 Hz |
50% RH; ASTM D150 |
| Dielectric Strength | 14.2 kV/mm | 360 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Plastcom PLASTAMID® 6 GF 30 031 TS PA6 reinforced with glass fiber, heat stabilized
- Plansee INERMET® IT170 Tungsten-Nickel-Copper Alloy
- SABIC Innovative Plastics Lexan® 3412 PC (Asia Pacific)
- Zircar Zirconia BusterF Alumina Bulk Fiber Insulation
- SABIC Innovative Plastics NORYL PX6120 PPE+PS
- Teknor Apex Monprene® MP-2328 Thermoplastic Elastomer
- Accuratus MACOR Machinable Glass Ceramic
- 3M Scotchgard™ 1002MS Multi-Layer Protective Films
- Cheng Yu Plastic A706G15 SAN, 15% Glass Fiber
- Albis Plastics Cellulose Acetate Butyrate B9024 (UVI, Odor Mask Added), 20% Plasticizer (discontinued **)
Copyright © lookpolymers.com All Rights Reserved