Eastman Tenite 371A2R30008 Cellulose Acetate Propionate, Natural, Trsp

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Cellulosic , Cellulose Acetate Propionate, Molded
Manufacturer	Eastman Chemical
Trade Name	Tenite
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Eastman Tenite 371A2R30008 Cellulose Acetate Propionate, Natural, Trsp.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Applications:Consumer-Personal CareToothbrushesProduct Description: Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite Cellulose Acetate Propionate 371-08 contains a mold release and has a plasticizer level of 8%.Information provided by Eastman.

Physical Properties	Metric	English	Comments
Specific Gravity	1.21 g/cc	1.21 g/cc	ASTM D792
Water Absorption	1.6 % @Time 86400 sec	1.6 % @Time 24.0 hour	Immersion; ASTM D570
Linear Mold Shrinkage	0.0020 - 0.0060 cm/cm	0.0020 - 0.0060 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	92	92	ASTM D785
Tensile Strength at Break	38.9 MPa	5640 psi	ASTM D638
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Elongation at Break	45 %	45 %	ASTM D638
Flexural Strength	52.0 MPa	7540 psi	ASTM D790
Flexural Modulus	1.758 GPa	255.0 ksi	ASTM D790
Izod Impact, Notched	0.910 J/cm @Temperature -40.0 °C	1.70 ft-lb/in @Temperature -40.0 °F	ASTM D256
	2.14 J/cm @Temperature 23.0 °C	4.01 ft-lb/in @Temperature 73.4 °F	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	110 - 170 µm/m-°C	61.1 - 94.4 µin/in-°F	ASTM D696
Specific Heat Capacity	1.26 - 1.67 J/g-°C	0.301 - 0.399 BTU/lb-°F	DSC
Thermal Conductivity	0.170 - 0.330 W/m-K	1.18 - 2.29 BTU-in/hr-ft²-°F	ASTM C177
Deflection Temperature at 0.46 MPa (66 psi)	90.0 °C	194 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	80.0 °C	176 °F	ASTM D648
Vicat Softening Point	105 °C	221 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Refractive Index	1.46 - 1.49	1.46 - 1.49	n<sub>D</sub>; ASTM D542
Haze	<= 8.5 %	<= 8.5 %	ASTM D1003
Transmission, Visible	>= 90 %	>= 90 %	ASTM E308

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 - 1.00e+15 ohm-cm	1.00e+13 - 1.00e+15 ohm-cm	ASTM D257
Dielectric Constant	3.3 - 3.8 @Frequency 1.00e+6 Hz	3.3 - 3.8 @Frequency 1.00e+6 Hz	ASTM D150
Dissipation Factor	0.010 - 0.15 @Frequency 1.00e+6 Hz	0.010 - 0.15 @Frequency 1.00e+6 Hz	ASTM D150

Descriptive Properties	Value	Comments
Formula Number	371	Mold Release
Plasticizer	8 percent
Soluble Matter Loss	0.1 percent	ASTM D570
Weight Loss on Heating	0.4 percent	ASTM D707, 72 hrs, 80°C

Users viewing this material also viewed the following: