Eastman Tenite 360E3V45512 Propionate Water Clear, Trsp

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Cellulosic , Cellulose Acetate Propionate, Molded
Manufacturer	Eastman Chemical
Trade Name	Tenite
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Eastman Tenite 360E3V45512 Propionate Water Clear, Trsp.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite Cellulose Acetate Propionate 360-12 has a plasticizer level of 12%.Applications/UsesAppliancesConsumer - Personal careProfiles

Physical Properties	Metric	English	Comments
Specific Gravity	1.20 g/cc	1.20 g/cc	ASTM D792
Water Absorption	1.5 %	1.5 %	24h Immersion; ASTM D570
Linear Mold Shrinkage	0.0020 - 0.0060 cm/cm	0.0020 - 0.0060 in/in	ASTM D955
Collected Volatile Condensable Material	0.40 %	0.40 %	Weight loss on heating, 72hrs, 80°C; ASTM D707

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Tensile Strength, Yield	31.7 MPa	4600 psi	ASTM D638
Elongation at Break	45 %	45 %	ASTM D638
Flexural Yield Strength	41.4 MPa	6000 psi	ASTM D790
Flexural Modulus	1.448 GPa	210.0 ksi	ASTM D790
Izod Impact, Notched	1.07 J/cm @Temperature -40.0 °C	2.00 ft-lb/in @Temperature -40.0 °F	ASTM D256
	4.16 J/cm @Temperature 23.0 °C	7.79 ft-lb/in @Temperature 73.4 °F	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	110 - 170 µm/m-°C @Temperature 20.0 °C	61.1 - 94.4 µin/in-°F @Temperature 68.0 °F	ASTM D696
Specific Heat Capacity	1.26 - 1.67 J/g-°C	0.301 - 0.399 BTU/lb-°F	DSC
Thermal Conductivity	0.170 - 0.330 W/m-K	1.18 - 2.29 BTU-in/hr-ft²-°F	ASTM C177
Deflection Temperature at 0.46 MPa (66 psi)	83.0 °C	181 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	ASTM D648
Vicat Softening Point	96.0 °C	205 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Refractive Index	1.46 - 1.49	1.46 - 1.49	n<sub>D</sub>; ASTM D542
Haze	<= 8.5 %	<= 8.5 %	ASTM D1003
Transmission, Visible	>= 90 % @Thickness 1.52 mm	>= 90 % @Thickness 0.0598 in	ASTM D1003

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 - 1.00e+15 ohm-cm	1.00e+13 - 1.00e+15 ohm-cm	ASTM D257
Dielectric Constant	3.3 - 3.8 @Frequency 1e+6 Hz	3.3 - 3.8 @Frequency 1e+6 Hz	ASTM D150
Dielectric Strength	11.8 - 18.7 kV/mm	300 - 475 kV/in	ASTM D149
Dissipation Factor	0.010 - 0.15 @Frequency 1e+6 Hz	0.010 - 0.15 @Frequency 1e+6 Hz	ASTM D150

Descriptive Properties	Value	Comments
Plasticizer, %	12
Soluble Matter Loss, %	0.1	ASTM D570

Users viewing this material also viewed the following: