POLYMER SEARCH

EMS-Grivory Grivory® GV-2 FWA black 9225 PA*-GF20

Category	Polymer , Thermoplastic , Nylon
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® GV-2 FWA black 9225 PA*-GF20.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Product description: Grivory GV-2 FWA black 9225 is a 20% glass fiber reinforced engineering thermoplastic material based on a combination of semicrystalline polyamide with partially aromatic copolyamide. Grivory GV-2 FWA black 9225 is used for injection molding technical parts, exhibiting exceptional characteristics even after moisture absorption: high stiffness and strengthdimensional stability, low warpagegood chemical resistancegood surface finish Grivory GV is the economical alternative to die-cast alloys. Grivory GV-2 FWA black 9225 is a specially heat stabilized material. It is particularly suitable for parts in direct contact with drinking water and food. Grivory GV-2 FWA black 9225 is suitable for all engineering thermoplastic applications with the requirement of approvals in contact with foodstuffs or/and in contact with drinking water.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Water Absorption	5.0 %	5.0 %	ISO 62
Moisture Absorption	1.50 %	1.50 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	200 MPa	29000 psi	conditioned; ISO 2039-1
	225 MPa	32600 psi	dry; ISO 2039-1
Tensile Strength at Break	125 MPa	18100 psi	conditioned; ISO 527-1/-2
	145 MPa	21000 psi	dry; ISO 527-1/-2
Elongation at Break	3.0 %	3.0 %	dry; ISO 527-1/-2
	4.0 %	4.0 %	conditioned; ISO 527-1/-2
Tensile Modulus	7.20 GPa	1040 ksi	conditioned; ISO 527-1/-2
	8.20 GPa	1190 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	5.00 J/cm²	23.8 ft-lb/in²	dry; ISO 179/1eU
	5.00 J/cm²	23.8 ft-lb/in²	conditioned; ISO 179/1eU
	3.50 J/cm² @Temperature 30.0 °C	16.7 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	3.50 J/cm² @Temperature 30.0 °C	16.7 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	0.700 J/cm²	3.33 ft-lb/in²	dry; ISO 179/1eA
	0.700 J/cm²	3.33 ft-lb/in²	conditioned; ISO 179/1eA
	0.600 J/cm² @Temperature 30.0 °C	2.86 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	0.600 J/cm² @Temperature 30.0 °C	2.86 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 µm/m-°C	5.56 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	100 µm/m-°C	55.6 µin/in-°F	ISO 11359-1/-2
Melting Point	260 °C	500 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	220 °C	428 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	230 °C	446 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	65.0 °C	149 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	dry; IEC 60093
	1.00e+14 ohm-cm	1.00e+14 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Strength	33.0 kV/mm	838 kV/in	dry; IEC 60243-1
	33.0 kV/mm	838 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	575 V	575 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Food contact	EU Requirements
	FDA
Form	Granules
Industry & Consumer goods	Housewares
	Hydraulics & Pneumatics
	Mechanical Engineering
	Power transmission
	Sanitary, water and gas supply
Processing	Injection Molding
Product Attributes	Partially aromatic Polyamide
Water Contact	ACS
	DVGW W270
	KTW
	NSF 61
	WRAS

Users viewing this material also viewed the following: