DuPont Performance Polymers Hytrel® G3548L TPC-ET (Unverified Data**)

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyester, TP , Polyester Thermoplastic Elastomer
Manufacturer	DuPont Performance Polymers
Trade Name	Hytrel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Hytrel® G3548L TPC-ET (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Hytrel® G3548L is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Specific Gravity	1.15 g/cc	1.15 g/cc	ASTM D792
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Water Absorption	5.0 % @Temperature 23.0 °C	5.0 % @Temperature 73.4 °F	Immersion 24h; ASTM D570
	5.0 % @Temperature 23.0 °C	5.0 % @Temperature 73.4 °F	Immersion 24h; ISO 62
Linear Mold Shrinkage	0.0050 cm/cm	0.0050 in/in	Flow; ASTM D955
Linear Mold Shrinkage, Flow	0.010 cm/cm @Thickness 2.00 mm	0.010 in/in @Thickness 0.0787 in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.010 cm/cm @Thickness 2.00 mm	0.010 in/in @Thickness 0.0787 in	ISO 294-4
Melt Flow	10 g/10 min @Load 2.16 kg, Temperature 190 °C	10 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
	10 g/10 min @Load 2.16 kg, Temperature 190 °C	10 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	<= 35	<= 35	ASTM D2240
	<= 35	<= 35	ISO 868
	26 @Time 15.0 sec	26 @Time 0.00417 hour	ISO 868
Tensile Strength at Break	9.70 MPa @Temperature 23.0 °C	1410 psi @Temperature 73.4 °F	ISO 527 (1BA bar)
	10.3 MPa @Temperature 23.0 °C	1490 psi @Temperature 73.4 °F	ASTM D638
Tensile Stress	1.70 MPa @Strain 5.00 %, Temperature 23.0 °C	247 psi @Strain 5.00 %, Temperature 73.4 °F	ASTM D638
	2.50 MPa @Strain 10.0 %, Temperature 23.0 °C	363 psi @Strain 10.0 %, Temperature 73.4 °F	ISO 527 (1BA bar)
	2.60 MPa @Strain 10.0 %, Temperature 23.0 °C	377 psi @Strain 10.0 %, Temperature 73.4 °F	ASTM D638
Elongation at Break	200 % @Temperature 23.0 °C	200 % @Temperature 73.4 °F	ASTM D638
	240 % @Temperature 23.0 °C	240 % @Temperature 73.4 °F	ISO 527 (1BA bar)
Tensile Modulus	0.0230 GPa @Temperature 23.0 °C	3.34 ksi @Temperature 73.4 °F	ISO 527
Flexural Modulus	0.00700 GPa @Temperature 100 °C	1.02 ksi @Temperature 212 °F	ASTM D790
	0.00700 GPa @Temperature 100 °C	1.02 ksi @Temperature 212 °F	ISO 178
	0.0320 GPa @Temperature 23.0 °C	4.64 ksi @Temperature 73.4 °F	ISO 178
	0.0324 GPa @Temperature 23.0 °C	4.70 ksi @Temperature 73.4 °F	ASTM D790
	0.0500 GPa @Temperature -40.0 °C	7.25 ksi @Temperature -40.0 °F	ISO 178
	0.0620 GPa @Temperature -40.0 °C	8.99 ksi @Temperature -40.0 °F	ASTM D790
Izod Impact, Notched	NB @Temperature -40.0 °C	NB @Temperature -40.0 °F	ASTM D256
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ASTM D256
Izod Impact, Notched (ISO)	NB @Temperature -40.0 °C	NB @Temperature -40.0 °F	ISO 180/1A
Charpy Impact, Notched	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	500 µm/m-°C @Temperature -40.0 - 23.0 °C	278 µin/in-°F @Temperature -40.0 - 73.4 °F	ASTM E 831
	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	ASTM E 831
	500 µm/m-°C @Temperature -40.0 - 23.0 °C	278 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	220 µm/m-°C @Temperature -40.0 - 23.0 °C	122 µin/in-°F @Temperature -40.0 - 73.4 °F	ASTM E 831
	220 µm/m-°C @Temperature -40.0 - 23.0 °C	122 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
	240 µm/m-°C @Temperature 23.0 - 55.0 °C	133 µin/in-°F @Temperature 73.4 - 131 °F	ASTM E 831
	240 µm/m-°C @Temperature 23.0 - 55.0 °C	133 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1/-2
	310 µm/m-°C @Temperature 55.0 - 120 °C	172 µin/in-°F @Temperature 131 - 248 °F	ASTM E 831
	310 µm/m-°C @Temperature 55.0 - 120 °C	172 µin/in-°F @Temperature 131 - 248 °F	ISO 11359-1/-2
Melting Point	154 °C	309 °F	10°C/min; ISO 11357-1/-3
	156 °C	313 °F	ASTM D3418
Brittleness Temperature	-61.0 °C	-77.8 °F	ISO 974
UL RTI, Electrical	50.0 °C @Thickness 1.50 mm	122 °F @Thickness 0.0591 in	UL 746B
	50.0 °C @Thickness 3.00 mm	122 °F @Thickness 0.118 in	UL 746B
UL RTI, Mechanical with Impact	50.0 °C @Thickness 3.00 mm	122 °F @Thickness 0.118 in	UL 746B
	50.0 °C @Thickness 1.50 mm	122 °F @Thickness 0.0591 in	UL 746B
UL RTI, Mechanical without Impact	50.0 °C @Thickness 1.50 mm	122 °F @Thickness 0.0591 in	UL 746B
	50.0 °C @Thickness 3.00 mm	122 °F @Thickness 0.118 in	UL 746B
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	IEC 60695-11-10
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	IEC 60695-11-10
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL94
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	UL94

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	>= 600 V @Thickness 3.00 mm, Temperature 23.0 °C	>= 600 V @Thickness 0.118 in, Temperature 73.4 °F	UL 746A

Processing Properties	Metric	English	Comments
Melt Temperature	180 °C	356 °F	Optimum; Extrusion
	190 °C	374 °F	Optimum; Injection Molding
Mold Temperature	30.0 - 40.0 °C	86.0 - 104 °F	Injection Molding
	40.0 °C	104 °F	optimum; Injection Molding
Drying Temperature	80.0 °C	176 °F	Extrusion
	80.0 °C	176 °F	Injection Molding
Dry Time	2.00 - 3.00 hour	2.00 - 3.00 hour	Extrusion
	2.00 - 3.00 hour	2.00 - 3.00 hour	Injection Molding
Moisture Content	<= 0.080 %	<= 0.080 %	Extrusion
	<= 0.080 %	<= 0.080 %	Injection Molding

Descriptive Properties	Value	Comments
Additive	Antioxidant
Appearance	Beige, Light
Drying Recommended	Yes
Extrudable - Blown Film	Yes
Extrudable - Cast Film	Yes
Extrudable - Coating	Yes
Extrudable - Filament	Yes
Extrudable - Hose	Yes
Extrudable - Sheet	Yes
Extrudable - Tubing	Yes
Extrudable - Wire and Cable	Yes
Extrusion Blow Moldable	Yes
Features	Color Stability, Good
	Copolymer, Block
	General Purpose
	Hardness, Low
Forms	Pellets
Generic	TPC-ET
Heat Stabilized	Yes
Injection Blow Moldable	Yes
Material Status	Current
Melt Castable	Yes
Part Marking Code	>TPC-ET<	ISO 11469

Users viewing this material also viewed the following: