Dow FINGERPRINT™ DFDA-7510 NT Linear Low Density Polyethylene Resin

Category	Polymer , Thermoplastic , Polyethylene (PE) , LLDPE
Manufacturer	Dow Chemical
Trade Name	FINGERPRINT™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Dow FINGERPRINT™ DFDA-7510 NT Linear Low Density Polyethylene Resin.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

FINGERPRINT™ DFDA-7510 NT resin is produced using UNIPOL™ process technology. It is intended for use in micro irrigation tube, durable hose and tube, profile extrusion, and injection molded fitting applications. Information provided by Dow

Physical Properties	Metric	English	Comments
Density	0.920 g/cc	0.0332 lb/in³	natural resin; ASTM D792
Environmental Stress Crack Resistance	>= 500 hour	>= 500 hour	F<sub>o</sub>; Compression molded parts prepared according to ASTM D 1928, condition A.; ASTM D1693
High Load Melt Index	44 g/10 min @Load 21.6 kg, Temperature 190 °C	44 g/10 min @Load 47.6 lb, Temperature 374 °F	ASTM D1238
Melt Index of Compound	0.60 g/10 min @Load 2.16 kg, Temperature 190 °C	0.60 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	44	44	Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D2240
Tensile Strength at Break	15.5 MPa	2250 psi	Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D638
Tensile Strength, Yield	11.0 MPa	1600 psi	Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D638
Elongation at Break	800 %	800 %	Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D638
Flexural Modulus	0.310 GPa	45.0 ksi	Compression molded parts prepared according to ASTM D 1928, method 1, procedure B.; ASTM D790

Thermal Properties	Metric	English	Comments
Brittleness Temperature	<= -100 °C	<= -148 °F	Compression molded parts prepared according to ASTM D 1928, procedure A.; ASTM D746

Users viewing this material also viewed the following: