- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Corning SE 4400 KIT
Dow Corning SE 4400 KIT
| Category | Polymer , Adhesive , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning SE 4400 KIT.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part, grey, heat cure, flowable, thermally conductive, UL V-0.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.15 g/cc @Temperature 25.0 °C |
2.15 g/cc @Temperature 77.0 °F |
|
| Viscosity | 76000 cP | 76000 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 78 | 78 | |
| Tensile Strength, Ultimate | 5.80 MPa | 841 psi | |
| Elongation at Break | 90 % | 90 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.920 W/m-K | 6.38 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F | |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
| Dielectric Strength | >= 25.0 kV/mm | >= 635 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 1020 min @Temperature 150 °C |
17.0 hour @Temperature 302 °F |
|
| 1020 min @Temperature 22.0 °C |
17.0 hour @Temperature 71.6 °F |
||
| Shelf Life | 7.00 Month | 7.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | grey | |
| Flowable | yes | |
| Hydrophobic | yes | |
| Self Leveling | yes | |
| Water Resistant | yes |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics GELOY HRA150 ASA (Europe-Africa-Middle East)
- Plastcom SLOVALEN PH 91 T 40 PP, 40% mineral filling
- SABIC Innovative Plastics ULTEM 1110F PEI (Europe-Africa-Middle East)
- A. Schulman POLYAXIS® CP813-31 General-Purpose Polyethylene
- Dow Corning SYL-OFF® PMCPEM 7974 Emulsion Coating
- Covestro Bayfol® AS-A 2-4 Polycarbonate + PBT
- ExxonMobil LDPE LD 617.LN Low Density Polyethylene Resin
- Epoxy Technology EPO-TEK® H20E Electrically Conductive, Silver Epoxy
- BASF Capron® 8203C HS Blend Nylon 6 (Dry) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved