- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Corning 3-6512 A&B ELASTOMER
Dow Corning 3-6512 A&B ELASTOMER
| Category | Polymer , Adhesive , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning 3-6512 A&B ELASTOMER.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part, transparent, 1:1, moderate heat cure, long pot life, cures to soft elastomer.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.970 g/cc @Temperature 25.0 °C |
0.970 g/cc @Temperature 77.0 °F |
|
| Viscosity | 850 cP | 850 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(0), 1/10 mm | >= 48 | >= 48 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Transmission, Visible | 90 % | 90 % | transparent; thickness not quantified |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 4.00e+14 ohm-cm | 4.00e+14 ohm-cm | |
| Dielectric Strength | 20.7 kV/mm | 525 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 70.0 °C |
2.00 hour @Temperature 158 °F |
|
| Shelf Life | 24.0 Month | 24.0 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | transparent | |
| Color | red | |
| Flowable | yes | |
| Gel Hardness (Grams/Penetration) | 105 | |
| Self Leveling | yes | |
| Water Resistant | yes | |
| Working Time (min) | 1440 |
Users viewing this material also viewed the following:
- Nylene® 600 Nylon 6
- PTS Trimid® N6-G33L 33% GFR Lubricated Nylon 6
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 20 PHR N774 (SRF) Filler
- H.C. Starck Grade HD 20 Boron Carbide, B4C
- SABIC Innovative Plastics LNP STAT-KON Noryl_NC3508 PPE+HIPS (Europe-Africa-Middle East)
- Teknor Apex Monprene® MP-1531 Thermoplastic Elastomer
- UBE UBESTA® 3030U Nylon 12 (After Hydrochloric Acid (10%) for 500 hours)
- A. Schulman POLYBATCH™ Ivory 9035 Concentrate Based In Polyethylene
- Teknor Apex Monprene® MP-2830 Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved