- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Impact Grade, Molded
- Cossa Polimeri ESTADIENE 3008 MT Acrylonitrile Butadiene Styrene
Cossa Polimeri ESTADIENE 3008 MT Acrylonitrile Butadiene Styrene
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Impact Grade, Molded |
| Manufacturer | Cossa Polimeri S.r.L. |
| Trade Name | ESTADIENE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Cossa Polimeri ESTADIENE 3008 MT Acrylonitrile Butadiene Styrene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ABS with very high impact resistanceHigh impact resistance at low temperature, medium heat resistance, good processabilityInformation provided by Cossa Polimeri S.r.l.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D 792 |
| Linear Mold Shrinkage | 0.0040 - 0.0070 cm/cm | 0.0040 - 0.0070 in/in | ASTM D 955 |
| Melt Flow | 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C |
8.0 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D 1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D 638 |
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ASTM D 638 |
| Elongation at Break | 25 % | 25 % | ASTM D 638 |
| Flexural Modulus | 2.20 GPa | 319 ksi | ASTM D 790 |
| Izod Impact, Notched | 3.50 J/cm @Temperature 0.000 °C |
6.56 ft-lb/in @Temperature 32.0 °F |
ASTM D 638 |
| 4.00 J/cm @Temperature 23.0 °C |
7.49 ft-lb/in @Temperature 73.4 °F |
ASTM D 256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 100 °C @Load 5.00 kg |
212 °F @Load 11.0 lb |
50°C/hr; ASTM D 1525 |
| 110 °C @Load 0.999 kg |
230 °F @Load 2.20 lb |
50°C/hr; ASTM D 1525 | |
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
|
| HB @Thickness 3.20 mm |
HB @Thickness 0.126 in |
||
| Glow Wire Test | 650 °C @Thickness 2.00 mm |
1200 °F @Thickness 0.0787 in |
I.E.C. 695-2-1 |
Users viewing this material also viewed the following:
- MV Labs EU700 Eu(NO3)3·5H2O Europium(III) nitrate pentahydrate
- PEAK Werkstoff DISPAL S270 Aluminum Alloy, AlSi25Fe4Ni3CuMgMnCrTi, Condition T4
- Magyar Aluminum ALO-DN-4F Alumina
- Lucas-Milhaupt Silvaloy® A30 Brazing Alloy
- SABIC Innovative Plastics LNP THERMOCOMP DC004E PC (Europe-Africa-Middle East)
- Tra-Con Tra-Duct 8205 One-Part Electrically Conductive Silver-Filled Epoxy
- Dymax 3072 Solvent-Free Plastic Adhesive
- Azdel Plus C220B02N 22% Chopped Fiber Mat / PP Resin Matrix
- Overview of materials for Acetal Copolymer, Glass Bead Filled
Copyright © lookpolymers.com All Rights Reserved