ConocoPhillips ANDEROL® PQ AA 250 White Mineral Food Grade Gear Oil, ISO Grade 680, SAE Gear Oil Grade 250

Category	Fluid , Lubricant , White Mineral Oil (WMO)
Manufacturer	ConocoPhillips
Trade Name	ANDEROL®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	ConocoPhillips ANDEROL® PQ AA 250 White Mineral Food Grade Gear Oil, ISO Grade 680, SAE Gear Oil Grade 250.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: ANDEROL PQ AA Series Gear Oils are white mineral oil based products that meet the former H-1 approval requirements of the USDA where incidental food contact can occur. PQ AA Series Gear Oils provide excellent lubrication protection for gear sets, bearings, pumps and chain applications. The heavier viscosity grades can be used in worm gear applications with no harm to yellow metals. PQ food grade lubricants are approved, recommended and field tested by many OEMs in the food processing, baking, bottling, canning, meat processing and pharmaceutical industries. PQ food grade lubricants are listed by NSF International under “USDA Regulations, Proprietary Substances and Nonfood Compounds.”Information provided by ConocoPhillips.Anderol® is a registered trademark of The Anderol Company.

Physical Properties	Metric	English	Comments
Specific Gravity	0.900 g/cc	0.900 g/cc	60°F; ASTM D-1298
Viscosity Measurement	111	111	Viscosity Index; ASTM D-2270
Saybolt Viscosity at 100°F	2964 SUS	2964 SUS	ASTM D-2161
Saybolt Viscosity at 210°F	202 SUS	202 SUS	ASTM D-2161
Kinematic Viscosity at 40°C (104°F)	640 cSt	640 cSt	ASTM D-445
Kinematic Viscosity at 100°C (212°F)	43 cSt	43 cSt	ASTM D-445

Mechanical Properties	Metric	English	Comments
Four Ball Extreme Pressure, Weld Load	72.6 kg	160 lb (mass)	ASTM D-2783
Four Ball Wear	0.400 mm	0.0157 in	1 hr. @ 1200 rpm, 75°C (167°F), 40 kg.; ASTM D-4172

Thermal Properties	Metric	English	Comments
Pour Point	-6.11 °C	21.0 °F	ASTM D-97
Flash Point	230 °C	446 °F	ASTM D-92

Descriptive Properties	Value	Comments
Copper Corrosion	1B	3 hrs. at 100°C, ASTM D130
Rust Test	Pass	ASTM D665A

Users viewing this material also viewed the following: