Amity Thermosets ATG 116 Phenolic Molding Organic and inorganic Filler, Compression Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic
Manufacturer	Amity Thermosets
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Amity Thermosets ATG 116 Phenolic Molding Organic and inorganic Filler, Compression Molded.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Characteristics:Medium mechanical strength Medium electrical insulationGeneral purposeColor- BlackMedium flow Applications: Electrical accessories & fittings ( medium quality ) Domestic appliance handles & knobsBottle caps Lamp casing, housings Connectors, etc.Information provided by Amity Thermosets Limited

Physical Properties	Metric	English	Comments
Density	1.40 - 1.46 g/cc	0.0506 - 0.0527 lb/in³	Molding; IS 867-1963
Apparent Bulk Density	0.680 - 0.730 g/cc	0.0246 - 0.0264 lb/in³	IS 867-1963
Water Absorption	0.35 - 0.48 %	0.35 - 0.48 %	IS 13411-1993
Linear Mold Shrinkage	0.0074 - 0.0086 cm/cm	0.0074 - 0.0086 in/in	IS 13411-1992

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	42.0 - 54.0 MPa	6090 - 7830 psi	5 mm/min.; IS 867-1963
Shear Strength	60.0 - 70.0 MPa	8700 - 10200 psi	IS 867-1963
Izod Impact, Notched	0.220 - 0.400 J/cm	0.412 - 0.749 ft-lb/in	IS 13411-1992

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+10 - 1.00e+11 ohm-cm	1.00e+10 - 1.00e+11 ohm-cm	IS 3396-1979
Surface Resistance	3.2e+9 - 1.0e+10 ohm	3.2e+9 - 1.0e+10 ohm	IS 3396-1979
Dielectric Strength	3.00 - 5.00 kV/mm @Temperature 90.0 °C	76.2 - 127 kV/in @Temperature 194 °F	IS 2584-1963

Processing Properties	Metric	English	Comments
Mold Temperature	160 - 180 °C	320 - 356 °F
Injection Pressure	15.68 - 34.3 MPa	2274 - 4970 psi	Mold Pressure
Cure Time	0.333 - 0.417 min	0.00556 - 0.00694 hour	per mm
Shelf Life	12.0 Month	12.0 Month	10-25°C

Users viewing this material also viewed the following: