- HOME
- POLYMER SEARCH
- Nonferrous Metal
- Copper Alloy
- Brass
- Chicago Extruded Metals UNS C34500 Copper-Zinc-Lead Alloy
Chicago Extruded Metals UNS C34500 Copper-Zinc-Lead Alloy
| Category | Metal , Nonferrous Metal , Copper Alloy , Brass |
| Manufacturer | Chicago Extruded Metals (CXM) |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chicago Extruded Metals UNS C34500 Copper-Zinc-Lead Alloy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Copper-Zinc-Lead Alloy (Leaded Brass)Finished product available in rods.Chicago Extruded Metal temper codes: H01, H02Information provided by Chicago Extruded Metals
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.47 g/cc | 0.306 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell B | 40 - 80 | 40 - 80 | |
| Tensile Strength | 276 - 1030 MPa | 40000 - 150000 psi | |
| Tensile Strength, Yield | 103 - 345 MPa | 15000 - 50000 psi | |
| Elongation at Break | 10 - 30 % | 10 - 30 % | |
| Machinability | 90 % | 90 % | UNS C36000 (free-cutting brass) = 100% |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 116 W/m-K | 804 BTU-in/hr-ft²-°F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Copper, Cu | 62 - 65 % | 62 - 65 % | |
| Iron, Fe | 0.15 % | 0.15 % | |
| Lead, Pb | 1.5 - 2.5 % | 1.5 - 2.5 % | |
| Other, total | 0.40 % | 0.40 % | |
| Zinc, Zn | 31.95 - 35.95 % | 31.95 - 35.95 % | as balance |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.00000663 ohm-cm | 0.00000663 ohm-cm |
Users viewing this material also viewed the following:
- Parker Chomerics Tecknit NC-Consil® 770 Nickel Coated Graphite Filled Silicone Elastomer
- Mi-Tech Metals SW50 50 Silver/50 Tungsten PM Metal Composite
- Lubriplate APG 80W-90 Petroleum-Based Gear, Bearing, & Recirculating Oil
- Haynes 230® alloy, 40% cold reduction, 1066°C anneal for 5 minutes
- ELASTO UK Dryflex® 660650S SEBS Based Material, Semi-Filled Qualities, 65A Hardness, Natural
- Crucible Steel SUE52 Martensitic Steel
- A. Schulman ComAlloy Comtuf® 639 Nylon 6/6, Mineral Reinforced, Impact Modified, Flow Enhanced
- Axiall 8603 Moldings & Extrusions Flexible PVC
- 3M 9085UV Ultra High Temperature 100 HT Adhesive Transfer Tape
- Chem Polymer Chemlon 104-13 G Nylon 66, 13% Glass Fiber Reinforced
Copyright © lookpolymers.com All Rights Reserved