Chevron Phillips HiD® 99416 with Food Grade Antistat HDPE Blow Molding Resin (discontinued **)

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips HiD® 99416 with Food Grade Antistat HDPE Blow Molding Resin (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Resin Type: Linear Homopolymer; Blow Molding, Sheeting & Profile Extrusion ResinCharacteristics: High Stiffness, Good Impact Resistance, Very Low Odor & Taste Transfer, Designated for Uniloy Blowmolding Systems, Quality Assured by Processing Prior to Release, Good Trimming Characteristics, Controlled Swell Characteristics, Lightweighting CapabilitiesApplications:Milk Bottles, Water Bottles, Juice Bottles, Food Bottles including Wide Mouth, Toys, Sheeting. Burn Rate

Physical Properties	Metric	English	Comments
Density	>= 0.960 g/cc	>= 0.0347 lb/in³	ASTM D1505
Apparent Bulk Density	0.590 g/cc	0.0213 lb/in³	ASTM D1895
Melt Flow	0.69 g/10 min @Load 2.16 kg, Temperature 190 °C	0.69 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	69	69	ASTM D2240
Tensile Strength, Yield	32.0 MPa	4640 psi	ASTM D638
Elongation at Break	>= 500 %	>= 500 %	ASTM D638
Flexural Modulus	1.47 GPa	213 ksi	3 pt. secant. ASTM D790
Tensile Impact Strength	109 kJ/m²	51.9 ft-lb/in²	S Bar; ASTM D 1822

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	78.0 °C	172 °F	ASTM D648
Vicat Softening Point	128 °C	262 °F	ASTM D1525
Brittleness Temperature	<= -75.0 °C	<= -103 °F	ASTM D746

Users viewing this material also viewed the following: