Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating

Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat. Non-shrinking, 100% solids. ARC SD4i is formulated for the resurfacing of the metal components subjected to extreme corrosive or severe fluid flow conditions. ARC SD4i is a low viscosity composite that is designed to be spray applied but may also be applied by roller or brush. This product is designed as a two coat system to provide extended life for plant equipment. Cured ARC SD4i provides a high gloss ceramic surface with resistance to erosion-corrosion and permeation.Benefits:High loading of ceramic reinforcements extends equipment service life against wearExceptional resistance to blistering and chemical attack during long term immersion conditionsHigh gloss finish reduces drag, improves pump efficiency on worn componentsTough resin structure resists thermal-mechanical shockOutstanding adhesion insures reliable performance against underfilm corrosionConvenient 2-1 volumetric mix ratio and verification of mix by color change. Suggested Uses:Vacuume PumpsHeat ExchangersHoppersTank LiningsValve AssembliesRaw Water FiltersValvesWaterboxesCooling Water SystemsPump ComponentsPressure VesselsPipeline CoatingsCondensersPulp Dewatering ScrewsInformation provided by Chesterton