- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Stablohm 675 Nickel, Chromium and Iron Resistance Wire
California Fine Wire Stablohm 675 Nickel, Chromium and Iron Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Nickel Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | Stablohm |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Stablohm 675 Nickel, Chromium and Iron Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.25 g/cc | 0.298 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 655 MPa | 95000 psi | Annealed |
| 1070 MPa | 155000 psi | Stress relieved | |
| 1210 MPa | 175000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 14.0 µm/m-°C @Temperature 20.0 °C |
7.78 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 13.2 W/m-K | 91.6 BTU-in/hr-ft²-°F | |
| Melting Point | 1350 °C | 2462 °F | |
| Maximum Service Temperature, Air | 900 °C | 1650 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Chromium, Cr | 16 % | 16 % | |
| Iron, Fe | 24 % | 24 % | as balance |
| Nickel, Ni | 60 % | 60 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000112 ohm-cm | 0.000112 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Faint | |
| Temperature Coefficient of Resistance | 0.00015 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | +0.002 |
Users viewing this material also viewed the following:
- Plastcom SLOVASTER® B1 GF 20 PBT, 20% glass fibre
- Materion Beryllium Copper Alloy 25 Tube; HT (TH04) Temper; over 9.5 to 25.4 mm o.d. (UNS C17200)
- Greene Tweed Avalon® 57 PTFE, Thermoset Resin Filled
- LyondellBasell Adflexâ„¢ KS-084P TPO Resin
- SABIC Innovative Plastics LNP Lubricomp GL004 PSU (Asia Pacific)
- Techmer ES Elastoblend® PA6 GF40 IM HS UV RD 40% Glass Filled
- Loctite® Durabond® E-20NS Epoxy Adhesive
- Chevron Phillips Marlex® HHM TR-418Q MDPE Hexene Copolymer
- Fainplast Compounds GS 7080 Flexible PVC, Injection Molding for Technical Items
Copyright © lookpolymers.com All Rights Reserved