- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire NIFE 5200 Nickel Iron Resistance Wire
California Fine Wire NIFE 5200 Nickel Iron Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Nickel Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | NIFE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire NIFE 5200 Nickel Iron Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.44 g/cc | 0.305 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 483 MPa | 70000 psi | Annealed |
| 827 MPa | 120000 psi | Stress relieved | |
| 1030 MPa | 150000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 20.0 °C |
8.33 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.523 J/g-°C @Temperature 20.0 °C |
0.125 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 28.9 W/m-K | 201 BTU-in/hr-ft²-°F | |
| Melting Point | 1425 °C | 2597 °F | |
| Maximum Service Temperature, Air | 1099 °C | 2010 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Iron, Fe | 30 % | 30 % | |
| Nickel, Ni | 70 % | 70 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000199 ohm-cm | 0.0000199 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Strong | |
| Temperature Coefficient of Resistance | 0.0052 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | -0.04 |
Users viewing this material also viewed the following:
- NeXolve Novastrat® 400 Polyimide
- BASF Capron® 5233G HS BK-102 33% Glass-Filled Nylon 66 (Dry) (discontinued **)
- Fujipoly Industries Sarcon® 45Q Thin-Film QR
- Ineos ABS Lustran® H950
- LG Chemical XR407E ABS, Heat Resistance
- LATI Latene® AG9H MI/40 PP Homopolymer, 40% Mica Reinforced, Heat Stabilized
- Elektro-Isola Etronax MMMF PTFE Phenolic, Cotton Fabric Reinforcement, Light Brown, Sheets
- ChevronTexaco Delo® 100 Motor Oil, SAE 40
- 3M Scotchkote™ XF 895 Fast Curing Floor Coating
Copyright © lookpolymers.com All Rights Reserved