Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultramid® B3K PA6 (Conditioned)

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer BASF
Trade Name Ultramid®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BASF Ultramid® B3K PA6 (Conditioned).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Ultramid B 3K is an easy flowing, stabilized for fast processing, grade of nylon 6.
Physical Properties Metric English Comments
Density 1.13 g/cc
0.0408 lb/in³
ISO 1183
Water Absorption 9.0 - 10 %
9.0 - 10 %
ISO 62
Moisture Absorption at Equilibrium 2.6 - 3.4 %
2.6 - 3.4 %
(23°C/50% R.H.); ISO 62
Viscosity Test 150 cm³/g
150 cm³/g
Viscosity number; ISO 307
Linear Mold Shrinkage 0.0065 cm/cm
0.0065 in/in
Melt Flow 181 g/10 min

@Load 5.00 kg,
Temperature 275 °C
181 g/10 min

@Load 11.0 lb,
Temperature 527 °F
ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength, Yield 40.0 MPa
5800 psi
50mm/min; ISO 527
Elongation at Yield 20 %
20 %
50mm/min; ISO 527
Modulus of Elasticity 1.00 GPa
145 ksi
ISO 527
Izod Impact, Notched (ISO) NB
NB
ISO 180/A
Charpy Impact Unnotched NB
NB
ISO 179/1eU
Charpy Impact, Notched 6.00 J/cm²
28.6 ft-lb/in²
ISO 179/1eA
Tensile Creep Modulus, 1000 hours 700 MPa
102000 psi
ISO 899
Thermal Properties Metric English Comments
Specific Heat Capacity 1.70 J/g-°C
0.406 BTU/lb-°F
Thermal Conductivity 0.330 W/m-K
2.29 BTU-in/hr-ft²-°F
DIN 52612
Melting Point 220 °C
428 °F
DIN 53765
Maximum Service Temperature, Air 100 °C
212 °F
for 50% loss of tensile strength after 20,000 hr
112 °C
234 °F
for 50% loss of tensile strength after 5,000 hr
180 °C
356 °F
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+10 ohm-cm
1.00e+10 ohm-cm
IEC 60093
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Dielectric Constant 7.0

@Frequency 1.00e+6 Hz
7.0

@Frequency 1.00e+6 Hz
IEC 60250
Dissipation Factor 0.30

@Frequency 1.00e+6 Hz
0.30

@Frequency 1.00e+6 Hz
IEC 60250
Comparative Tracking Index 600 V
600 V
Test Solution A; IEC 60112
Processing Properties Metric English Comments
Melt Temperature 250 - 270 °C
482 - 518 °F
Injection-molding/Extrusion
Mold Temperature 40.0 - 80.0 °C
104 - 176 °F
Injection-molding
Descriptive Properties Value Comments
Color Natural
Commercial Status North America and Europe
Form Pellets
Impact Modified No
Primary Processing Technique Injection Molding
Processing Injection Molding
Special characteristic Heat stabilized or stable to heat
Release agent
U.V. stabilized or stable to weather
Copyright © lookpolymers.com All Rights Reserved