BASF Ultramid® 8267G HS BK-106 15/25% Glass/Mineral Filled PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8267G HS BK-106 15/25% Glass/Mineral Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultramid 8267G HS BK-106 is a heat stabilized, weather resistant, 40% mineral and glass fiber reinforced PA6 injection molding compound with improved UV resistance and sink mark resistance. The combination of mineral and glass fibers result in a high performance, low warp and cost effective engineering thermoplastic. It exhibits high strength, good UV resistance, rigidity and good heat distortion temperatures. It has a relatively high resistance to creep under load. The heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons.

Physical Properties	Metric	English	Comments
Density	1.289 g/cc	0.04657 lb/in³	Melt; ISO 1183
	1.48 g/cc	0.0535 lb/in³	ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	125 MPa	18100 psi	0.2 in/min; ASTM Test
	51.0 MPa @Temperature 120 °C	7400 psi @Temperature 248 °F	ISO Data
	51.0 MPa @Temperature 120 °C	7400 psi @Temperature 248 °F	ASTM Test
	59.0 MPa @Temperature 80.0 °C	8560 psi @Temperature 176 °F	ASTM Test
	59.0 MPa @Temperature 80.0 °C	8560 psi @Temperature 176 °F	ISO Data
	178 MPa @Temperature -40.0 °C	25800 psi @Temperature -40.0 °F	ASTM Test
	178 MPa @Temperature -40.0 °C	25800 psi @Temperature -40.0 °F	ISO Data
Tensile Strength, Ultimate	115 MPa	16700 psi	5mm/min; ISO 527
Elongation at Break	2.0 %	2.0 %	5mm/min; ISO 527
	2.0 %	2.0 %	0.2 in/min; ASTM Test
	3.0 % @Temperature -40.0 °C	3.0 % @Temperature -40.0 °F	ASTM Test
	3.0 % @Temperature -40.0 °C	3.0 % @Temperature -40.0 °F	ISO Data
	11 % @Temperature 120 °C	11 % @Temperature 248 °F	ISO Data
	11 % @Temperature 120 °C	11 % @Temperature 248 °F	ASTM Test
	13 % @Temperature 80.0 °C	13 % @Temperature 176 °F	ASTM Test
	13 % @Temperature 80.0 °C	13 % @Temperature 176 °F	ISO Data
Tensile Modulus	9.20 GPa	1330 ksi	1mm/min; ISO 527
	2.62 GPa @Temperature 120 °C	380 ksi @Temperature 248 °F	ISO Data
	3.09 GPa @Temperature 80.0 °C	448 ksi @Temperature 176 °F	ISO Data
	10.79 GPa @Temperature -40.0 °C	1565 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	178 MPa	25800 psi	ISO Data
	200 MPa	29000 psi	ASTM Test
Flexural Modulus	7.20 GPa	1040 ksi	ISO Data
	7.58 GPa	1100 ksi	ASTM Test
Izod Impact, Notched	0.550 J/cm @Thickness 3.17 mm	1.03 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	6.00 kJ/m²	2.86 ft-lb/in²	ISO Test
	4.00 kJ/m² @Temperature -40.0 °C	1.90 ft-lb/in² @Temperature -40.0 °F	ISO Test
Charpy Impact Unnotched	4.60 J/cm²	21.9 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	31.0 µm/m-°C @Temperature -30.0 - 30.0 °C	17.2 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
Specific Heat Capacity	2.028 J/g-°C	0.4847 BTU/lb-°F	Melt
Thermal Conductivity	0.250 W/m-K	1.74 BTU-in/hr-ft²-°F	Melt
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	215 °C	419 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75
	202 °C	396 °F	ASTM Test
Flammability, UL94	HB	HB
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in

Descriptive Properties	Value	Comments
Color	BK-106
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
	X
	X
UL.UL-C	Yes

Users viewing this material also viewed the following: