POLYMER SEARCH

BASF Ultraform® N2520 XL2 POM

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced
Manufacturer	BASF
Trade Name	Ultraform®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultraform® N2520 XL2 POM.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Is a POM, injection-molding grade with increased electrical conductivity, for applications with reduced mechanical requirements.Information provided by BASF

Physical Properties	Metric	English	Comments
Bulk Density	0.850 g/cc	0.0307 lb/in³
Density	1.43 g/cc	0.0517 lb/in³	ISO 1183
Water Absorption	0.80 %	0.80 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C; 50% RH; ISO 62
Melt Flow	7.579 g/10 min @Load 2.16 kg, Temperature 190 °C	7.579 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	179 MPa @Load 98.0 kg, Time 30.0 sec	26000 psi @Load 216 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength at Break	40.0 MPa	5800 psi	5 mm/min; ISO 527-2
Elongation at Break	1.5 %	1.5 %	Nominal, 50 mm/min; ISO 527-2
Modulus of Elasticity	3.00 GPa	435 ksi	ISO 527-2
Charpy Impact Unnotched	2.00 J/cm² @Temperature -30.0 °C	9.52 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	2.40 J/cm² @Temperature 23.0 °C	11.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	120 µm/m-°C @Temperature 23.0 - 55.0 °C	66.7 µin/in-°F @Temperature 73.4 - 131 °F	DIN 53752
Melting Point	166 °C	331 °F	DIN 53765
Maximum Service Temperature, Air	100 °C	212 °F
Deflection Temperature at 1.8 MPa (264 psi)	116 °C	241 °F	ISO 75-2
Vicat Softening Point	150 °C	302 °F	ISO 306
Decomposition Temperature	>= 240 °C	>= 464 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	0.20 ohm-cm	0.20 ohm-cm	IEC 60093
Surface Resistance	3000 ohm	3000 ohm	IEC 60093

Processing Properties	Metric	English	Comments
Processing Temperature	200 °C	392 °F	Hopper Throat
Zone 1	200 °C	392 °F	Feed zone
Zone 2	200 °C	392 °F	Compression
Zone 3	200 °C	392 °F	Metering-zone
Zone 4	200 °C	392 °F	Nozzle
Melt Temperature	200 °C	392 °F	Optimal
	190 - 220 °C	374 - 428 °F	Injection-molding
Mold Temperature	90.0 °C	194 °F	Optimal
	60.0 - 120 °C	140 - 248 °F	Injection-molding
Drying Temperature	100 °C	212 °F
Dry Time	3 hour	3 hour

Descriptive Properties	Value	Comments
Commercial Status	Europe
Ignition Temperature	320 - 340°C	ASTM D1929
Peripheral screw speed	<0.3 m/s
Primary Processing Technique	Injection Molding

Users viewing this material also viewed the following: