BASF Elastollan® S80A Polyester Type Polyurethane Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer	BASF
Trade Name	Elastollan®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Elastollan® S80A Polyester Type Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Processed by extrusion or injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fuel and solvent resistance. These products can be injection and blow molded and extruded. As with all TPU products this grade must be dried prior to processing.Property values below are typical values based on test samples cured 20 hours at 100°C before testing. Information provided by BASF Corporation.

Physical Properties	Metric	English	Comments
Density	1.21 g/cc	0.0437 lb/in³	ASTM D792

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	78	78	ASTM D2240
Tensile Strength, Ultimate	31.0 MPa	4500 psi	ASTM D412
Tensile Strength, Yield	4.80 MPa @Strain 100 %	696 psi @Strain 100 %	ASTM D-412
	8.30 MPa @Strain 300 %	1200 psi @Strain 300 %	ASTM D-412
Elongation at Break	750 %	750 %	ASTM D412
Tear Strength	80.0 kN/m	456 pli	ASTM D624
Taber Abrasion, mg/1000 Cycles	25	25	H-18 wheel; ASTM D-1044.
Tensile Set	45 %	45 %	at break; ASTM D-412

Users viewing this material also viewed the following: