- HOME
- POLYMER SEARCH
- Thermoplastic
- Acetal (POM)
- Azoty Tarnow™ TARNOFORM 300 K POM
Azoty Tarnow™ TARNOFORM 300 K POM
| Category | Polymer , Thermoplastic , Acetal (POM) |
| Manufacturer | Azoty Tarnow™ (Zaklady Azotowe) |
| Trade Name | TARNOFORM |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Azoty Tarnow™ TARNOFORM 300 K POM.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Tribological modified grade with addition of special chalk, which causes decrease of wear.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in³ | ISO 1183 |
| Melt Flow | 8.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
8.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ISO 2039-2 |
| Ball Indentation Hardness | 157 MPa | 22800 psi | 358 N; ISO 2039-1 |
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO 527 |
| Elongation at Break | 45 % | 45 % | ISO 527 |
| Flexural Strength | 66.0 MPa | 9570 psi | ISO 178 |
| Izod Impact, Notched (ISO) | 6.50 kJ/m² | 3.09 ft-lb/in² | 1A; ISO 180 |
| Charpy Impact, Notched | 0.650 J/cm² | 3.09 ft-lb/in² | 1eA; ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Heat Capacity | 1.48 J/g-°C | 0.354 BTU/lb-°F | |
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 114 °C | 237 °F | ISO 75 |
| Vicat Softening Point | 157 °C | 315 °F | 50 N; ISO 306 |
| Flammability, UL94 | HB @Thickness 3.20 mm |
HB @Thickness 0.126 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | IEC 60093 |
| Dielectric Constant | 4.1 @Frequency 1e+6 Hz |
4.1 @Frequency 1e+6 Hz |
IEC 60250 |
| Dissipation Factor | 0.0095 @Frequency 1e+6 Hz |
0.0095 @Frequency 1e+6 Hz |
IEC 60250 |
| Comparative Tracking Index | 600 V | 600 V | IEC 112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 180 - 230 °C | 356 - 446 °F | Barrel temperature |
| Mold Temperature | 60.0 - 120 °C | 140 - 248 °F |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPE G 7827 GREY
- Quadrant EPP Nylatron® GSM Nylon, Cast MoS2 Filled Type 6 (ASTM Product Data Sheet)
- PolyOne Edgetek® 5209 Natural 1 Acetal (POM) Copolymer
- ExxonMobil Unirex EP
- TSE Industries Millathane® 5004 Millable Polyurethane Elastomer, 305ºF Cure Temperature
- Cyclics CBT® 200 Thermoplastic Resin
- Alliance Polymers Viprene™ G75A-32U-BLK Thermoplastic Vulcanizate Elastomer
- 3M 4411N Extreme Sealing Tape
- A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66
- H.C. Starck Amperit® 529.053 Tungsten Carbide - Hastalloy C 85-15 (NiMoCrFeCo)
Copyright © lookpolymers.com All Rights Reserved