Arlon AD300C Commercial Microwave and RF Laminate Material

Category	Polymer , Thermoset
Manufacturer	Arlon
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon AD300C Commercial Microwave and RF Laminate Material.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Excellent Thermal Coefficient of Dielectric Constant (TCEr = -25 ppm/°C)Excellent PIM performanceHigh Thermal Conductivity ideal for Higher Power DesignsReduced Coefficient of Thermal Expansion in z-direction (CTEz)Cost-effective Advanced Material for Commercial RF Applications and High Volume Manufacturing DesignTightest Commercial Laminate DK Tolerance for Impedance ControlBenefits:Low Dielectric Loss (Loss Tangent)Lower Insertion Loss (S21)Excellent Electrical Phase Stability vs. TemperatureExcellent Copper Bond StrengthLow Moisture AbsorptionTypical Applications:Base Station AntennasPower Amplifiers (PA), Tower Mounted Amplifiers (TMA) and Tower Mounted Booster Amplifiers (TMB)Antenna Feed NetworksRF Passive ComponentsMultimedia Transmission SystemsInformation provided by Arlon Materials for Electronics (MED).

Physical Properties	Metric	English	Comments
Density	2.07 g/cc	0.0748 lb/in³	ASTM D792 Method A
Water Absorption	0.060 %	0.060 %	IPC TM-650 2.6.2.1

Mechanical Properties	Metric	English	Comments
Tensile Strength	40.7 MPa	5900 psi	Machine; IPC TM-650 2.4.18.3
	52.4 MPa	7600 psi	Cross; IPC TM-650 2.4.18.3
Modulus of Elasticity	3.86 GPa	560 ksi	IPC TM-650 2.4.18.3
Flexural Strength	68.9 MPa	10000 psi	Machine; IPC TM-650 2.4.4
	89.6 MPa	13000 psi	Cross; IPC TM-650 2.4.4
Poissons Ratio	0.26	0.26	ASTM D3039
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	To Copper (1 oz./35 micron); After Thermal Stress; IPC TM-650 2.4.8
	>= 1.75 kN/m	>= 10.0 pli	To Copper (1 oz./35 micron); At Elevated Temperatures; IPC TM-650 2.4.8.2
	2.10 kN/m	12.0 pli	To Copper (1 oz./35 micron); After Process Solutions; IPC TM-650 2.4.8

Thermal Properties	Metric	English	Comments
CTE, linear	9.00 µm/m-°C @Temperature 50.0 - 150 °C	5.00 µin/in-°F @Temperature 122 - 302 °F	x direction; IPC TM-650 2.4.41
	15.0 µm/m-°C @Temperature 50.0 - 150 °C	8.33 µin/in-°F @Temperature 122 - 302 °F	y direction; IPC TM-650 2.4.41
CTE, linear, Transverse to Flow	54.0 µm/m-°C @Temperature 50.0 - 150 °C	30.0 µin/in-°F @Temperature 122 - 302 °F	z direction; IPC TM-650 2.4.24
Thermal Conductivity	0.500 W/m-K	3.47 BTU-in/hr-ft²-°F	ASTM E1461
Decomposition Temperature	500 °C	932 °F	Onset; IPC TM-650 2.4.24.6
	555 °C	1030 °F	5 percent; IPC TM-650 2.4.24.6
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.20e+14 ohm-cm	1.20e+14 ohm-cm	C96/35/90; IPC TM-650 2.5.17.1
	1.90e+14 ohm-cm	1.90e+14 ohm-cm	E24/125; IPC TM-650 2.5.17.1
Surface Resistance	2.50e+14 ohm	2.50e+14 ohm	C96/35/90; IPC TM-650 2.5.17.1
	7.70e+14 ohm	7.70e+14 ohm	E24/125; IPC TM-650 2.5.17.1
Dielectric Constant	2.97 @Frequency 1.00e+6 Hz	2.97 @Frequency 1.00e+6 Hz	may vary by thickness; IPC TM-650 2.5.5.3
	2.97 @Frequency 1.00e+10 Hz	2.97 @Frequency 1.00e+10 Hz	may vary by thickness; IPC TM-650 2.5.5.5
Dielectric Strength	16.9 kV/mm	430 kV/in	IPC TM-650 2.5.6.2
Dielectric Breakdown	30000 V	30000 V	IPC TM-650 2.5.6
Dissipation Factor	0.0014 @Frequency 1.00e+6 Hz	0.0014 @Frequency 1.00e+6 Hz	IPC TM-650 2.5.5.3
	0.0020 @Frequency 1.00e+10 Hz	0.0020 @Frequency 1.00e+10 Hz	IPC TM-650 2.5.5.5
Arc Resistance	>= 180 sec	>= 180 sec	IPC TM-650 2.5.1

Descriptive Properties	Value	Comments
IPC Delamination - T260 (minutes)	>60	IPC TM-650 2.4.24.1
IPC Delamination - T288 (minutes)	>60	IPC TM-650 2.4.24.1
IPC Delamination - T300 (minutes)	>60	IPC TM-650 2.4.24.1
Temperature Coefficient of Dielectric (ppm/°C)	-25	IPC TM-650 2.5.5.5; at 10 GHz (-40 - 150°C)

Users viewing this material also viewed the following: