Polymer Property : Peel Strength = 1.75 kN/m Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Peel Strength	1.75 - 2.10 kN/m	10.0 - 12.0 pli
ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive SD, Off-White Information provided by ITW Devcon
Peel Strength	1.75 kN/m	10.0 pli	1 in. x 8in. Stainless steel screen at 180Â° pull angle
Momentive Performance Materials RTV160 Electronic Grade Silicone Adhesive Sealant, White RTV160, RTV162, and RTV 167 adhesive sealants for GE silicones are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atm..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	T-peel, Al/Al
Master Bond EP37-3FLFAN Electrically Isolating, Flexible Epoxy Description: Master Bond Polymer System EP37-3FLFAN is a two component system for high performance potting, bonding, sealing and coating that is formulated to cure at room temperature or more rapidl..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	T-peel
Master Bond EP76M-1R Nickel Conductive Epoxy Adhesive Description: Master Bond Polymer System EP76M-1R is a two component, nickel filled, electrically conductive adhesive for high performance bonding formulated to cure at room temperature or more rapid..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli
Master Bond EP79 Two Component, Silver Coated, Nickel Filled Conductive Epoxy Master Bond Polymer System EP79 is a two component, silver coated, nickel filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or ..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	T-peel, Al to Al
Master Bond Supreme 46HT-2 Toughened, High Shear and Peel Strength Adhesive Description: Master Bond Supreme 46HT-2 is a two component epoxy adhesive featuring an attractive balance of good shear and peel strengths for high performance structural bonding and coating suitabl..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	To Copper (1 oz./35 micron); After Thermal Stress; IPC TM-650 2.4.8
Arlon AD300C Commercial Microwave and RF Laminate Material Excellent Thermal Coefficient of Dielectric Constant (TCEr = -25 ppm/°C)Excellent PIM performanceHigh Thermal Conductivity ideal for Higher Power DesignsReduced Coefficient of Thermal Expansion in ..
Peel Strength	1.75 kN/m	10.0 pli	To Copper (1 oz./35 micron); After Process Solutions; IPC TM-650 2.4.8
Arlon CLTE-XT High Precision Ceramic PTFE Microwave material for improved thermal management, Excellent dimensional stability with high degree of phase stability vs. temperature.CLTE-XT is a micro-dispersed ceramic PTFE composite utilizing ..
Peel Strength	1.75 kN/m	10.0 pli
Arlon IsoClad 917 Non-Woven Fiberglass Reinforced PTFE Traditional - Highest Performance, PTFE Coated Light Woven Glass Styles, Interdispersed PTFE FilmInformation provided by Arlon Materials for Electronics (MED).
Peel Strength	1.75 kN/m	10.0 pli
Arlon IsoClad 933 Non-Woven Fiberglass Reinforced PTFE Traditional - Highest Performance, PTFE Coated Light Woven Glass Styles, Interdispersed PTFE FilmInformation provided by Arlon Materials for Electronics (MED).
Peel Strength	1.75 kN/m	10.0 pli	Bond Strength; ASTM D624
Arlon P29514R015 0.0165" (0.419 mm) Semi-Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Self-Fusing Silicone RubberSubstrate: 7727 Style FiberglassProduct Advatages:Flexibility: Silicone rubber resists damage due to vibration, frame movement under loa..
Peel Strength	1.75 kN/m	10.0 pli	Bond Strength; ASTM D624
Arlon R35640T003 0.003" (0.0762 mm) Uncured Silicone Rubber with Polyethylene Naphthalate Substrate Design/Construction:Liner: Polyester Side 1: Uncured Silicone RubberSubstrate: Polyethylene NaphthalateAppearance: Gray gum on glass fiber fabricThis data represents typical values for the productio..
Peel Strength	1.75 kN/m	10.0 pli	Bond Strength (S1 to S2); ASTM D624
Arlon R36338R015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1, Layer 2: Uncured Silicone Rubber Side 1, Layer 1: Uncured Silicone Rubber Substrate: Style 7628 FiberglassSide 2: Cured Silicone RubberAppearan..
Peel Strength	1.75 kN/m	10.0 pli	Adhesion to Steel; ASTM D1000
3M Scotch® 31 Heavy Duty Mining Tape Scotch® Heavy Duty Mining Tape 31 has a tough, abrasion-resistant backing for jacket repair on mining cables. Due to extremely abrasive environment, the original jacket on the cable gets damaged of..
Peel Strength	1.75 kN/m	10.0 pli	on canvas
3M Scotch-Weld™ 3797 Hot Melt Adhesive High ball and ring; Low viscosity and Good for electrical pottingInformation provided by 3M
Peel Strength	1.75 kN/m	10.0 pli	T-Peel
3M Scotch-Weld™ DP8005 Black Structural Adhesive 3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005 is a two-part acrylic-based adhesive (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropyl..
Peel Strength	1.75 kN/m	10.0 pli	Faceside, to Stainless Steel, 180° Peel, 2 mil Al
3M XP2112 Hi-Performance Adhesive Transfer Tape 3M™ X-Series Industrial Attachment Tapes offer a variety of performance characteristics and product construction to support demanding application requirements. This product line provides a range of..
Peel Strength	1.75 kN/m	10.0 pli	90° Peel, PET/Stainless Steel, 72 hrs at 70°C; ASTM D3330
3M 7953MP Hi-Performance Acrylic 200MP This adhesive meets the requirements of most long-term applications. It offers temperature resistance to 400°F (204°C). Peel adhesion values are excellent on most membrane switch substrate materia..
Peel Strength	1.75 kN/m	10.0 pli	Adhesion to PVC
3M EPS-300 Heat Shrink Tubing 3M Heat Shrink tubing EPS-300 is a 3:1 thin-wall, flexible tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with ..
Peel Strength	1.75 kN/m	10.0 pli	T-Peel
3M Scotch-Weld™ DP8005 Translucent Structural Adhesive 3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005 is a two-part acrylic-based adhesive (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropyl..
Peel Strength	1.75 kN/m @Temperature 22.0 - 24.0 °C	10.0 pli @Temperature 71.6 - 75.2 °F	Etched Aluminum T-Peel
3M Scotch-Weld™ EC-1386 Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive EC-1386 is a one-part, 100% solids, thermosetting liquid adhesive.Information provided by 3M
Peel Strength	1.75 kN/m	10.0 pli	Polycarbonate, 180°, 2 mil al foil, 72 hr RT, Backside; ASTM D3330
3M 9629PC Double Coated Tape with Quick Bonding Adhesive 360 3M™ Double Coated Tapes with 3M™ Quick Bonding Adhesive 360 provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints...
Peel Strength	1.75 kN/m	10.0 pli	T-Peel; ASTM D1876
3M Scotch-Weld™ 2290 Epoxy Adhesive/Coating 3M™ Scotch-Weld™ Epoxy Adhesive/Coating 2290 is an amber tinted thermo-setting adhesive/coating for metal to metal bonding and coating. It can be used to assemble laminated steel cores for electri..
Peel Strength	1.75 kN/m	10.0 pli	Steel T-Peel; ASTM D1876
3M Scotch-Weld™ DP 3501 Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive DP 3501 is a rapid room temperature curing, two-part epoxy adhesives for use in bonding many metals, wood, and a variety of plastics. Equal parts by volume are easi..
Peel Strength	>= 1.75 kN/m	>= 10.0 pli	T-peel, Al to Al
Master Bond Supreme 3AN One Component, Heat Curing Epoxy Adhesive Description: Master Bond Polymer System SUPREME 3AN is a one component, heat cured epoxy adhesive and sealant, featuring high peel and shear strength along with excellent thermal conductivity and co..