- HOME
- POLYMER SEARCH
- Ceramic/Metallic Coating
- Aremco Lamp-Coat™ LC4010-GL High Temperature Coating, Silicone
Aremco Lamp-Coat™ LC4010-GL High Temperature Coating, Silicone
| Category | Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Silicone |
| Manufacturer | Aremco |
| Trade Name | Lamp-Coat™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Lamp-Coat™ LC4010-GL High Temperature Coating, Silicone.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Aluminum-filled coating for application directly over uncoated headlamps to 1020 ºF (550 ºC)
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.05 g/cc | 1.05 g/cc | |
| Solids Content | 31.9 % | 31.9 % | by volume |
| 35.8 % | 35.8 % | by weight | |
| Volatile Organic Compounds (VOC) Content | 731 g/l | 731 g/l | |
| Viscosity | 300 - 400 cP | 300 - 400 cP | |
| Thickness | 25.4 microns | 1.00 mil | recommended dry film thickness |
| 79.5 microns | 3.13 mil | estimated wet film thickness | |
| Storage Temperature | 4.44 - 32.2 °C | 40.0 - 90.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 549 °C | 1020 °F | Continuous |
| Flash Point | 48.0 °C | 118 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature |
| Cure Time | 4.80 min | 0.0800 hour | Air Set prior to curing |
| 12000 min @Temperature 30.0 °C |
200 hour @Temperature 86.0 °F |
10 mins at 900°F | |
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Silver | |
| Dry Film Coverage ft2/gal | 512 | at 1 mil |
| Thinner | Ethanol |
Users viewing this material also viewed the following:
- Polimeri Europa Europrene® SOL T 172 Styrene - Butadiene Block Copolymer
- Dielectric Polymers NT-8512-2 Photo Processing Tape (discontinued **)
- Eastman Tenite Polyethylene 1810A Low Density Polyethylene - Molding (discontinued **)
- Lucent Polymers G66-13 Nylon 66, 13% Glass Fiber Reinforced
- Karina 905-32/170-CY-AC Orange PVC Compound
- KKPC Kuhmo HI 425EP Extrusion Molding HIPS
- Spartech EP5240 Calcium Carbonate Filled Homopolymer
- Diamond Polymers GPPS BEADS Injection Molding Grade, General Purpose Polystyrene
- SABIC Innovative Plastics Lexan® HFD4412 PC (Europe-Africa-Middle East)
- Beijing Chemical Industry KAIFA® 3030 PET Resin
Copyright © lookpolymers.com All Rights Reserved