- HOME
- POLYMER SEARCH
- Ceramic/Metallic Coating
- Aremco Corr-Paint™ CP4040 High Temperature Protective Coating Silicone
Aremco Corr-Paint™ CP4040 High Temperature Protective Coating Silicone
| Category | Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Silicone |
| Manufacturer | Aremco |
| Trade Name | Corr-Paint™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Corr-Paint™ CP4040 High Temperature Protective Coating Silicone.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Low viscosity, white coating for motor windings to 1100°F (593°C)
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.27 g/cc | 1.27 g/cc | |
| Solids Content | 44.2 % | 44.2 % | by weight |
| 46.1 % | 46.1 % | by volume | |
| Volatile Organic Compounds (VOC) Content | 117 g/l | 117 g/l | |
| Viscosity | 400 - 900 cP | 400 - 900 cP | |
| Thickness | 38.1 microns | 1.50 mil | recommended dry film thickness |
| 102 microns | 4.00 mil | estimated wet film thickness | |
| Storage Temperature | 12.8 - 29.4 °C | 55.0 - 85.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 593 °C | 1100 °F | |
| Flash Point | >= 100 °C | >= 212 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 12.2 kV/mm | 310 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature |
| Cure Time | >= 60.0 min | >= 1.00 hour | Air Set prior to curing |
| 45.0 min @Temperature 232 °C |
0.750 hour @Temperature 450 °F |
Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F. | |
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | White | |
| Dry Film Coverage ft2/gal | 740 | at 1 mil |
| Thinner | Butyl Cellosolve/Water |
Users viewing this material also viewed the following:
- IDI Composites E-204 Thermoset Polyester, Sheet
- LATI Lastilac AR-V0E ABS, Flame Retardant
- Schott K7 Glass
- Silberline Aquavexâ„¢ 1752-207S
- SCG Chemicals EL-Leneâ„¢ M70 Butene (C4) Rotational Molding Resin
- Teknor Apex Telcar® TL-1336 Thermoplastic Elastomer
- Zircar Refractory Composites ASPA-970 Alumina-Silica Fiber Paper
- Colorite Polymers CS8039UL Non Lead Wire and Cable Vinyl Compound
- Arkema Group Nakan® FKS 911 S PVC, Soft Extrusion Grade
- 3M Scotch-Weld™ 3792 Hot Melt Adhesive
Copyright © lookpolymers.com All Rights Reserved