- HOME
- POLYMER SEARCH
- Ceramic/Metallic Coating
- Aremco Corr-Paint™ CP4000-S High Temperature Protective Coating Silicone-Polyester
Aremco Corr-Paint™ CP4000-S High Temperature Protective Coating Silicone-Polyester
| Category | Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Silicone |
| Manufacturer | Aremco |
| Trade Name | Corr-Paint™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Corr-Paint™ CP4000-S High Temperature Protective Coating Silicone-Polyester.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.45 g/cc | 1.45 g/cc | |
| Solids Content | 57.7 % | 57.7 % | by volume |
| 69.9 % | 69.9 % | by weight | |
| Volatile Organic Compounds (VOC) Content | 431 g/l | 431 g/l | |
| Viscosity | 400 - 600 cP | 400 - 600 cP | |
| Thickness | 25.4 microns | 1.00 mil | recommended dry film thickness |
| 43.9 microns | 1.73 mil | estimated wet film thickness | |
| Storage Temperature | 4.44 - 32.2 °C | 40.0 - 90.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 316 °C | 600 °F | Continuous |
| 427 °C | 800 °F | Intermittent | |
| Flash Point | 47.8 °C | 118 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature |
| Dry Time | 1.00 - 2.00 hour | 1.00 - 2.00 hour | Touch |
| 2.00 - 4.00 hour | 2.00 - 4.00 hour | Handling | |
| 1.0 - 24.0 hour | 1.0 - 24.0 hour | Recoat | |
| Cure Time | >= 60.0 min | >= 1.00 hour | Air Set prior to curing |
| 45.0 min @Temperature 249 °C |
0.750 hour @Temperature 480 °F |
||
| 60.0 min @Temperature 232 °C |
1.00 hour @Temperature 450 °F |
Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F. | |
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Black | |
| Dry Film Coverage ft2/gal | 925 | at 1 mil |
| Primer | Not Required | |
| Thinner | PM Acetate |
Users viewing this material also viewed the following:
- MV Labs SM880 Sm(OH)3.xH2O Samarium hydroxide hydrate
- DP7-3002 Polyurethane-based Biomedical Elastomer
- Latrobe LSSâ„¢ H13 Tool Steel (ASTM H13)
- Momentive Performance Materials Q-Coatâ„¢ Flash Evaporator
- LATI Latene® AG9H MI/40 PP Homopolymer, 40% Mica Reinforced, Heat Stabilized
- Sumitomo Bakelite Durez® 118 Phenolic, Compression Grade
- A. Schulman POLYFORT™ FPP 4529 Mineral Filled Copolymer Polypropylene
- Plenco 6343 Phenolic, Granular, Compression Molded
- ChevronTexaco Syn-Star® TL SAE 50
- DuPont Performance Polymers Crastin® SC193 NC010 PBT+SAN (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved