- HOME
- POLYMER SEARCH
- Adhesive
- Aremco Aremco-Seal™ 529HV High Temperature Specialty Coatings Silicone
Aremco Aremco-Seal™ 529HV High Temperature Specialty Coatings Silicone
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Aremco |
| Trade Name | Aremco-Seal™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Seal™ 529HV High Temperature Specialty Coatings Silicone.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High viscosity version, transparent silicone sealer with exceptional electrical and moisture resistance to 600°F (316°C). Ideal for use in cartridge heaters.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.09 g/cc | 1.09 g/cc | |
| Solids Content | 69 % | 69 % | by volume |
| 74.9 % | 74.9 % | by weight | |
| Volatile Organic Compounds (VOC) Content | 273 g/l | 273 g/l | |
| Viscosity | 1200 - 1600 cP | 1200 - 1600 cP | |
| Thickness | 25.4 microns | 1.00 mil | recommended dry film thickness |
| 36.8 microns | 1.45 mil | estimated wet film thickness | |
| Storage Temperature | 4.44 - 32.2 °C | 40.0 - 90.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 316 °C | 600 °F | Continuous |
| Flash Point | 27.8 °C | 82.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Breakdown | >= 430 V | >= 430 V |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 10.0 - 32.2 °C | 50.0 - 90.0 °F | Application Temperature |
| Cure Time | 30.0 - 60.0 min | 0.500 - 1.00 hour | Air Set prior to curing |
| 30.0 - 60.0 min | 0.500 - 1.00 hour | at 200°F; 0.75-1 hr at 480°F | |
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Clear | |
| Dry Film Coverage ft2/gal | 1106 | at 1 mil |
| Thinner | MEK |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPE A 9007 BLK
- SABIC 6821N Linear Low Density Polyethylene for Blown Film
- Silberline 4-Allâ„¢ E3053
- UBE UPISEL-N BE1210 Copper Clad Laminate
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 60 PHR Non-Black, Aerosil 200
- Arlon R32481R014 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
- Asia International Enterprise (Hong Kong) 60T6F Nylon 66, 30% Filled
- Eurotec® Tecomid® NB40 KK40 NL PA6, 40% glass fiber/mineral reinforced, natural
Copyright © lookpolymers.com All Rights Reserved