- HOME
- POLYMER SEARCH
- Thermoset
- Polyester, TS
- Thermoset Polyester Glass SMC
- Applied Composites 8041 Polyester SMC
Applied Composites 8041 Polyester SMC
| Category | Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester Glass SMC |
| Manufacturer | Applied Composites Corporation |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Applied Composites 8041 Polyester SMC.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Industry Application: ElectricalProduct Application: Business MachinesDistinct Features: UL 94-VO, Radiant Panel
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.85 g/cc | 0.0668 lb/in³ | ASTM D792 |
| Water Absorption | 0.20 % | 0.20 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00 cm/cm | 0.00 in/in | Cold Part VS Cold Tool; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Barcol | 50 | 50 | ASTM D2583 |
| Hardness, Rockwell M | 110 | 110 | ASTM D785 |
| Tensile Strength, Ultimate | 75.8 MPa | 11000 psi | ASTM D638 |
| Tensile Modulus | 12.4 GPa | 1800 ksi | ASTM D638 |
| Flexural Strength | 179 MPa | 26000 psi | ASTM D790 |
| Flexural Modulus | 10.3 GPa | 1500 ksi | Tangent; ASTM D790 |
| Compressive Strength | 172 MPa | 25000 psi | ASTM D695 |
| Izod Impact, Notched | 7.47 J/cm | 14.0 ft-lb/in | ASTM D256 |
| Taber Abrasion, mg/1000 Cycles | 0.60 | 0.60 | % Loss 1000 Cycles; FTMS1091 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 400 °F | Flexural Load; ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/4 in; UL746 |
| V-0 | V-0 | 1/8 in; UL746 | |
| V-0 | V-0 | 1/16 in; UL746 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® I2220 PC
- LyondellBasell Petrothene® NA340185 Low Density Polyethylene, Film Extrusion Grade
- Lubriplate SYNAC 46 Diester-Based Synthetic Air Compressor Fluid
- Master Bond EP45HTQ Quartz Filled Heat Resistant Epoxy
- Hexcel® HexPly® F652 Bismaleimide Resin, Carbon Tape Form
- DuPont Teijin Films Melinex® 359 Polyester Film, 1000 Gauge
- Arlon 48106R008 0.008" (0.203 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Covestro Makrolon® LED2245 Polycarbonate
- ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Hardened + 288°C Temper
Copyright © lookpolymers.com All Rights Reserved