Polymer Property : Surface Resistance = 1.00e+14 ohm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Surface Resistance	1.00e+14 - 1.00e+15 ohm	1.00e+14 - 1.00e+15 ohm	IEC 60093
Raschig Group 5563 DAP Glass-fiber reinforced diallyl phthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensiona..
Surface Resistance	1.00e+14 - 1.00e+15 ohm	1.00e+14 - 1.00e+15 ohm	IEC 60093
Raschig Group 6502 DAIP Diallyl Phthalate (DAP), Cast, Mineral Filler Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
Shell Carilon® D26VM100 Polyketone, High-Flow Injection Molding Grade (discontinued **) Shell announced in Feb. 2000 that the Carilon product line is being discontinued. CARILON Polymer D26VM100 is a high-flow injection molding grade with mechanical properties which classify it as an ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Polimeri Europa SINKRAL B23 ABS, Heat Stabilized (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-04-16-25 High heat resistant grade with good impact resistance. Suitable for injection moulding and extrusi..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
LG Chemical LUCEL GC225 POM+GF25%, High Rigidity Feature: Injection Molding, POM+GF25%, High RigidityApplication: Casings of Pump and Pivot BearingsCAS No. 66455-31-0 and 65997-17-3Information provided by LG Chemical
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
LG Chemical LUCEL GC240 POM+GF40%, High Rigidity Feature: Injection Molding, POM+GF40%, High RigidityApplication: Casings of Pump and Pivot BearingsCAS No. 66455-31-0 and 65997-17-3Information provided by LG Chemical
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Menzolit MenzolitÂ® BMC 2400 Unsaturated Polyester UP BMC 2400 is a general purpose BMC for applications in the field of low smoke density and non toxic smoke.. The flammability meets the demands of EN45545 and is classified according to British standa..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
LATI Laticonther 52/11 CP3/600 F3 PP Homopolymer High thermal conductivity product based on Polypropylene homopolymer (PPh). Special filler. Potentially suitable for food/medical contact application.Availability: Africa & Middle East; Asia Pacific..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Styrolution TerblendÂ® N NM-19 XP Beige 38163 ABS+PA (Dry) Description: TerblendÂ® N NM-19 XP is an UV stabilized ABS/PA blend combining very high impact strength, even at low temperatures with an outstanding processability and excellent surface appearanc..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	DIN 53482
Polyram RamTough PZ307G2 Polycarbonate, 10% Glass Fiber 10% glass fiber reinforced, UV stabilized polycarbonate for injection molding applicationsInformation provided by Polyram Ram On Ind.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	DIN 53482
Polyram RamTough PZ300G3 Polycarbonate, 15% Glass Fiber 15% Glass fiber reinforced polycarbonate for injection molding applicationsInformation provided by Polyram Ram On Ind.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Covestro Bayblend® T 85 Polycarbonate/ABS Blend High impact and notched impact strength, little risk of brittle fracture, high dimensional accuracy.Applications: Automotive components, electrical engineering.Information provided by Bayer.As of 1 ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Covestro Baydur® 60 Polyurethane Rigid integral skin polyurethane foam for engineering components. The integral distribution of density gives a higher flexural modulus. If required, the property level can be improved by increasing ..
Surface Resistance	1.00e+14 ohm @Temperature 23.0 °C	1.00e+14 ohm @Temperature 73.4 °F	ASTM D257
DuPont Performance Polymers VESPEL TP-8212 Polyimide DuPont Vespel TP-8212 parts are specified for high-temperature applications requiring electrical insulation. TP-8212 parts offer a unique balance of mechanical and thermal properties with a low coef..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Eurotec® Tecodur® PB70 GR10 NL PBT 10% glass fiber reinforced Excellent stiffness and hardnessGood mechanical strengthGood creep and fatigue behaviorVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Eurotec® Tecopet® PT74 GR20 BK002 XA20 PET, 20% glass fiber reinforced, flame retardant - halogen (RoHS compliant), heat stabilized, black Information provided by Eurotec®
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	CEI 60093
Addiplast Addinyl B2 R Nylon 6 High impact resistanceInformation provided by Addiplast.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
BASF Novolen® 1102 G Polypropylene Data was collected by ISO methods and provided by BASF.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
BASF Novolen® 1102 H Polypropylene Grade with high processing stability for packaging tapes, film tape, fibrillated film, monofilaments, thermoformed and blow molded parts.Data was collected by ISO methods and provided by BASF.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
BASF Polystyrol® 143 E Polystyrene (Europe) Medium strength, easy flowing general-purpose grade, suitable for blending with impact-modified Polystyrol, Styrolux and as a coextruded glossy capping layer.Data was collected by ISO methods and pr..
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	ASTM D257
CEN® Electronic Material CV Polyimide Film, 5 Mil Thickness CEN®CV polyimide film keeps the same film properties as CEN®CN polyimide film, and has an excellent balance of physical, chemical, and electrical properties over a wide temperature range. With sup..
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	ASTM D257
Gharda Chemicals GATONE™ 5330GF Polyetheretherketone (PEEK) (discontinued **) Characteristics: Outstanding Chemical Resistance Outstanding Wear Resistance Outstanding Resistance to HydrolysisExcellent Mechanical Properties Outstanding Thermal properties Very good Dielectric..
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	ASTM D257
Gharda Chemicals Gafone S 1500 Polysulfone (PS) (discontinued **) Characteristics: High Temperature Resistance - Tg 189°C Excellent Clarity Excellent Mechanical & Electrical properties Easy to process Very good Hydrolytic Resistance Applications: Elec..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
Solvay Specialty Polymers Veradel® 3320GF Polyethersulfone (PESU) (Unverified Data**) Veradel 3320GF is a 20% glass fiber reinforced grade of polyethersulfone (PESU). Adding glass fiber to polyethersulfone substantially increases the rigidity, tensile strength, creep resistance, dime..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Ineos ABS NOVODUR® P3T ABS, Injection Grade (discontinued **) Injection molding grade, higher heat resistance.Applications: Automotive industry.Information provided by the manufacturer.Novodur is produced by Styrolution (2014). This grade was discontinued pri..
Surface Resistance	1.00e+14 - 1.50e+14 ohm	1.00e+14 - 1.50e+14 ohm	ASTM D257
SABIC Innovative Plastics NORYL FP6130 PPE+PS Noryl* FP6130 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR a..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Polimeri Europa SINKRAL PD F332 ABS, Heat Stabilized (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MGN,105-15-16-20 General purpose injection grade which combines excellent thermal stability during processing with..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Polyram RamShine PAS703 ASA, UV Stabilized Is a general purpose injection molding ASA, good chemical resistance, UV stabilization.Information provided by Polyram.