Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
Full Cure |
Parker Chomerics Tecknit® 72-00005 Silver-Filled Flexible Resin Caulking System Description: TECKNIT standard electrically conductive caulks consist of four one-component resin systems filled with silver plated glass or copper particles. These systems are formulated to provide .. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Parker Chomerics THERM-A-FORM T644 Cure-in-Place Potting and Underfill Material Description: THERM-A-FORM™ thermally conductive silicone elastomer products are dispensable form-in-place compounds designed for heat transfer without excessive compressive force in electronics co.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
50%; Full Cure |
Parker Chomerics Tecknit CON/RTV-I One Part: Silver-Filled Silicone RTV Description: TECKNIT CON/RTV-I system is a pure silver loaded, one component RTV silicone adhesive sealant. It is ready to use without mixing and cures quickly at room temperature on exposure to moi.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
50%; Recommended for 1/8" dia bead |
Parker Chomerics Tecknit TeckBond™-C Silver-Plated Copper-Filled Adhesive Description: TECKBOND-C is a silicone rubber base filled with silver-plated copper particles to produce a highly conductive one-component adhesive sealant. The system is an RTV moisture-cured compou.. |
|||
Cure Time | 4320 - 7200 min @Temperature 25.0 °C |
72.0 - 120 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers MPC-W44A Polyurethane Gel MPC-W44A is a polyurethane gel formulation specifically designed for padding and cushioning application that requires Shore Durometer OOO scale hardness. Produces good rebound characteristics and g.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond HM129 Anaerobic Threadlocker Permabond® HM129 is a high strength medium viscosity anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. Cure is fast and reliable on st.. |
|||
Cure Time | 4320 - 5760 min @Temperature 25.0 °C |
72.0 - 96.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers SAI-1 Low Viscosity Variable Ratio Polyurethane Gel SAI-1 is custom formulated polyurethane gel material to yield very soft elastomer gel material from low viscosity components at room temperature. This material is variable mixing ratio so that the .. |
|||
Cure Time | >= 4320 min @Temperature 25.0 °C |
>= 72.0 hour @Temperature 77.0 °F |
|
Lord Adhesives HPC-3C Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Cure Time | 4320 - 14400 min @Temperature 93.3 °C |
72.0 - 240 hour @Temperature 200 °F |
|
Master Bond EP21LVSP6 Two component epoxy for bonding, sealing, coating and encapsulating Product Description: Master Bond EP21LVSP6 is a two component epoxy compound for high performance bonding, coating, sealing and encapsulating. It is formulated to cure at room temperature or more ra.. |
|||
Cure Time | 4320 - 18000 min @Temperature 23.9 °C |
72.0 - 300 hour @Temperature 75.0 °F |
|
Master Bond EP21LVSP6 Two component epoxy for bonding, sealing, coating and encapsulating Product Description: Master Bond EP21LVSP6 is a two component epoxy compound for high performance bonding, coating, sealing and encapsulating. It is formulated to cure at room temperature or more ra.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 724-14C Polyurethane Adhesive TRA-BOND 724-14C premixed and frozen, polyurethane adhesive is designed for good adhesion, providing strong, resilient bonds to a wide variety of substrates, including aluminum, solder, nylon, mylar.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 724-20 Polyurethane Adhesive TRA-BOND 724-20 polyurethane adhesive is designed for good adhesion, providing strong, resilient bonds to a wide variety of substrates including aluminum, solder, nylon, mylar and steel. TRA-BOND 72.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Duct 916H02 Room Temperature Cure, Conductive Silver Epoxy Adhesive TRA-DUCT 916H02 is an electrically conducting silver-filled epoxy compound recommended for electronic bonding and sealing applications that require a combination of good mechanical and electrical pr.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Master Bond EP21TDC-2 Highly Flexible Cryogenic Epoxy Compound Master Bond Polymer System EP21TDC-2 is a two component highly flexible epoxy resin compound for high performance bonding, sealing, coating and encapsulation. It is formulated to cure fully at ambie.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond Ablebond 862-2 Room Temperature Cure Epoxy Adhesive Ablebond 862-2 room temperature curing epoxy adhesive is designed for solder pad encapsulation or sealing the head/disk area in floppy disc assemblies. This resilient compound is suitable for bondin.. |
|||
Cure Time | 4320 min @Temperature 10.0 °C |
72.0 hour @Temperature 50.0 °F |
Full Load |
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t.. |
|||
Cure Time | 4320 min @Temperature 10.0 °C |
72.0 hour @Temperature 50.0 °F |
Full Load |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Overcoat End |
Chesterton ARC HT-T Spark Testable High Temperature Trowelable Abrasion Control Compound An advanced ceramic composite formulated to protect equipment from corrosion and erosion in elevated temperature water solution immersion. This system is a high viscosity composite that is applied b.. |
|||
Cure Time | 4320 min @Temperature 32.0 °C |
72.0 hour @Temperature 89.6 °F |
Full Mechanical/Chemical |
Chesterton ARC MXHT High temperature severe wear compound Description: An advanced ceramic composite for the protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack at elevated temperatures. It is applied at a thickness o.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
Minimum Bond Line |
Epoxy Technology EPO-TEK® E4110 Electrically Conductive, Silver Epoxy Product Description: EPO-TEK® E4110 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Epoxy Technology EPO-TEK® EJ2189-LV Electrically Conductive Epoxy Low Viscosity, two component room temp curing conductive epoxyInformation Provided by Epoxy Technology |
|||
Cure Time | 4320 min @Temperature 32.0 °C |
72.0 hour @Temperature 89.6 °F |
Full Mechanical |
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
Cure Time | 4320 - 7200 min @Temperature 24.0 °C |
72.0 - 120 hour @Temperature 75.2 °F |
full cure |
BCC Products BC 8160 Urethane Casting BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly.. |
|||
Cure Time | 4320 - 7200 min @Temperature 24.0 °C |
72.0 - 120 hour @Temperature 75.2 °F |
full cure |
BCC Products BC 8990 Polyurethane Elastomer BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product is a safe, easy-to-handle, room temperature mixing.. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo.. |
|||
Cure Time | 4320 min @Temperature 10.0 °C |
72.0 hour @Temperature 50.0 °F |
Full Load |
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si.. |