- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 176 °F
Polymer Property : Maximum Service Temperature, Air = 176 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 80.0 °C @Time 1.80e+7 sec |
176 °F @Time 5000 hour |
|
| Murtfeldt Muralen® Black Antistatic Polyethylene, Conductive Muralen® is based on high molecular weight polyethylene (PE-HMW) and is ideally suited for use in applications that require the generally impressive material properties of polyethylene. Because of.. |
|||
| Maximum Service Temperature, Air | 80.0 °C @Time 1.80e+7 sec |
176 °F @Time 5000 hour |
|
| Murtfeldt Original Material ”S”® Green Polyethylene Material ”S”® is based on virgin, ultrahigh molecular weight low pressure polyethylene and significantly exceeds the requirements of DIN 16972. In particular, Material ”S”® green has excellen.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Okulen® 2000 PE-UHMW, F-Ex OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | continuous |
| Orbilan ORBILAN® PE 1000 UHMW-PE Orbilan PE 1000 plastics distinguish themselves through their optimal balance of the technical features with regard to wear-resistance and impact resistance. The areas of use range from general mac.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous; FRISETTA Test Method |
| Nilit RECONYL B Recycled nylon 6 for injection molding Recycled nylon 6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous; 20,000 h |
| Quadrant EPP Nylatron® GS PA 6 + MoS2, extruded (ISO Data) The addition of MoS2 renders this material somewhat stiffer, harder and dimensionally more stable than Ertalon 66 SA, but results in some loss of impact strength. The nucleating effect of the molybd.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Service |
| NOVA Chemicals Dylite® F271T Specialty Expandable Polystyrene Features: Highly consistent bead size; high gloss characteristics; low energy consumption; fast cyclingApplications: Drinking cups -hot and cold, noodle bowls, take-out and ice cream containers, and.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous (GTP 50% Tensile); IEC 60216 |
| PolyOne Bergamid™ A700 TM-YF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Abatron 226 A/B Filled Potting Compound
(discontinued **) Dielectric structural potting and embedding adhesive. Green and most colors. 2/1 variable ratio.Information provided by Abatron. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Abatron 228 A/B Filled Potting Compound
(discontinued **) Filled crack injection and casting resin. Slow neutral gray and most colors. 65% filler heat sink. 2/1 variable ratio.Information provided by Abatron. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Polybutadiene Rubber (BR) |
|||
| Maximum Service Temperature, Air | 80.0 - 105 °C | 176 - 221 °F | |
| Sylvin Technologies 7056 PVC Wire/Cable Compound Information provided by Sylvin Technologies Inc. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use |
| Polyram PlusTek PA340S6 Nylon 6.6, 30% Glass beads 30% glass beads reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use |
| Polyram RamLloy PA917G4 PP/NYLON 66 alloy, 20% Glass Fiber 20% glass fiber reinforced PA66/PP alloy with reduced water absorption, dimensional stability and UV stabilized for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Trelleborg R398 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Trelleborg R574 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use |
| Polyram PlusTek PB801 Nylon 6, Impact Modified impact modified polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Elmer's Products Aron Alpha® 101 Cyanoacrylate Adhesive (Industrial Krazy Glue™) Superior tensile and shear strengths, well suited for metal bondingLow gap fill. Methyl base monomer. Excellent on rubber/plastic substrates. Excellent on metal substrates. Poor on porous substr.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Elmer's Products Aron Alpha® 202F Cyanoacrylate Adhesive (Industrial Krazy Glue™) Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Elmer's Products Aron Alpha® 802 Cyanoacrylate Adhesive (Industrial Krazy Glue™) Low odor, low chlorosis (bloom) when a transparent bond, appearance and strength are required.Medium gap fill. Ethoxyethyl monomer. Excellent on rubber/plastic substrates. Fair on metal substrate.. |
|||
| Maximum Service Temperature, Air | 80.0 - 110 °C | 176 - 230 °F | long term; EMS |
| EMS-Grivory Grivory® L 20 W 20 grey 9280 PA12 Product Description: Grilamid L 20 W 20 grey 9280 is a semiflexible plasticized medium viscosity polyamide 12 (PA12) extrusion grade. Grilamid L 20 W 20 grey 9280 is heat stabilized. The main featur.. |
|||
| Maximum Service Temperature, Air | 80.0 - 110 °C | 176 - 230 °F | long term; EMS |
| EMS-Grivory Grivory® XE 3982 PA12 Product description: Grilamid XE 3982 is a highly flexible extrusion grade, based on Polyamide 12 with following main attributes: High flexibilityLow plasticizer migration (low blooming)Very good ch.. |
|||
| Maximum Service Temperature, Air | <= 80.0 °C | <= 176 °F | |
| Arkema Group OREVAC® 18350 Grafted Maleic Anhydride Polyethylene OREVAC 18350 is a maleic anhydride grafted polyethylene used in the manufacturing of three layer MDPE and HDPE coating for steel pipeline. It is mainly used in pipe coating to have good adhesion per.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Service |
| 3M 8067 All Weather Flashing Tape 3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressur.. |
|||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |
| Trelleborg R742 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Copyright © lookpolymers.com All Rights Reserved