Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 121 °C | 250 °F | Intermittent use; ASTM D746-98 |
Rogers Corporation Poron® 4701-30-25 Urethane Foam, Very Soft Very soft, easily compressed for use where flexibility is a key requirement. Standard available thickness range from 0.021"Features and Benefits of PORON Products: Excellent compression set resi.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Intermittent use; ASTM D746-98 |
Rogers Corporation Poron® 4701-50 Supported Urethane Foam, Firm, PET Supported Firm material used for managing high energy impact with gasketing needs. Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm).Features and Benefits of PORON Products: Exce.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Intermittent use; ASTM D746-98 |
Rogers Corporation Poron® 4701-50 Thin as Cast Urethane Foam, Firm, Thin as Cast Firm material used for managing high energy impact with gasketing needs. Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm).Features and Benefits of PORON Products: Exce.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Resinlab® EP1112NC Black Electronic Grade Epoxy Encapsulant Resinlab™ EP1112NC Black is a two part unfilled fast curing electronic grade epoxy encapsulant designed for small to medium sized castings. EP1112NC Black is a modified version of the standard EP11.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Resinlab® EP324E Clear Two Part Epoxy Casting Resin Resinlab™ EP 324E Clear is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings. It cures at room temperature to a tough, semi-rigid polymer. It has good wettin.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Cured |
Resinlab® AR 4400 Metal & Composite Bonding Methacrylate Adhesive Resinlab™ AR 4400 is a 1:1 mix methacrylate-based structural adhesive formulated to bond almost all engineered thermoplastics, thermosets, composites, and metal structural elements together in any .. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Greene Tweed AR™ HT Abrasive-Resistant Thermoplastic ARHT™ is a proprietary thermoplastic material specifically developed for use a sbushings, bearings and wear rings in pumps handling abrasive media up to 250°F (121°C). ARHT provides outs.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
ITW Devcon Flex Welderâ„¢ Methacrylate Adhesive, Off-White Information provided by ITW Devcon |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Master Bond EP21NDFG Two component epoxy compound for high performance applications Product Description: Master Bond EP21NDFG is a two component, room temperature curing epoxy adhesive featuring outstanding physical properties, easy processing and a non-drip, paste-like consistency.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Master Bond EP37-3FLF Low Exotherm Highly Flexible Two Component Epoxy Master Bond Polymer System EP37-3FLF is a very flexible, low viscosity, optically clear two component epoxy resin system designed for high performance bonding, coating and casting applications. The .. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Master Bond MB306 Low Viscosity Methyl Cyanoacrylate Features superior bonding properties. Master Bond MB306 is a single component, low viscosity, rapid setting, methyl cyanoacrylate adhesive. Similar to other types of “super glue”, MB306 cures ver.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Master Bond EP21TDC-7 Highly Flexible Two Component Epoxy System Master Bond Polymer System EP21TDC-7 is a two component highly flexible epoxy resin system for high performance bonding, sealing, and coating. It is formulated to cure at ambient temperatures or mor.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | See Note 2. |
ChevronTexaco Multifak® EP NLGI Grade 2 Texaco Multifak EP greases deliver value through:Good water resistance — Strong resistance to wash out of bearings.Good rust and corrosion protection, even in wet conditions.Extreme pressure protec.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Operating Temperature |
Devcon Plastic Steel® Liquid (B) Epoxy General Repair EpoxyComments: Steel-filled liquid epoxy can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds. Hardens in about a.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
DuPont Teijin Films Mylar® CL Polyester Film, 50 Gauge Mylar® CL is an exceptionally strong polyester film designed to package foods. Foods can be heated or cooked in this film at temperatures up to 400°F. Mylar® CL is commercially available in nomin.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
3M 3340 HVAC Construction Aluminum foil tape, for use with rigid and flexible ducts. UL 181 A-P and 181 B-FX Listed.Information provided by 3M |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
3M 470 Electroplating Tape 3M™ Electroplating Tape 470 is a conformable and abrasion-resistant vinyl tape with excellent resistance to most chemicals used in typical electroplating processes.Information provided by 3M |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Service |
3M 7745FL Polyester Overlaminating Film 3M™ Polyester Overlaminating Film 7745FL utilizes a matte clear polyester that is recommended for optimum durability and appearance in dot matrix and hand writable applications. The matte coating r.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | AMS-S-8802, cured 14 days @ 50% RH |
3M AC-251 Black Class B-2 Aerospace Sealant 3M Aerospace Sealant AC-251 Black Class B are two-part, quick curing, polysulfide based canopy and windshield sealants. These products are formulated for sealing acrylic, glass, and polycarbonate ai.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | cured 14 days @ 50% RH |
3M AC-275 Class B-2 Aerospace Sealant 3M Aerospace Sealant AC-275 Class B is a high temperature two-component manganese dioxide cured, liquid polysulfide polymer sealants providing excellent fuel tank and fuselage seals. They have outst.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | cured 14 days @ 50% RH |
3M AC-770 Class B-2 Aerospace Sealant 3M Aerospace Sealant AC-770 Class B are fast cure, low density two-component, manganese dioxide cure, polysulfide fuselage sealants. 3M AC-770 Class B Sealants have outstanding resistance to aviatio.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Intermittent |
3M Scotch-Weld™ HT700 High Temperature Instant Adhesive 3M™ Scotch-Weld™ High Temperature Instant Adhesives provide superior performance for demanding applications where high temperatures, thermal cycling, or shock resistance is required. HT700 is a me.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
3M 7120 Performance Paper Label Material 3M™ Label Materials 7120 and 7122 latex impregnated paper with 3M™ 400 and 320 adhesives offer good conformability to curved surfaces and resistance to staining and moisture. Label Material 7120 h.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Long term |
3M 92015 Double Coated Tape with Adhesive 200MP 3M™ Double Coated Tapes with 3M™ Adhesive 200MP feature a thin polyester film for dimensional stability and improved handling with ease of die-cutting and laminating. The 3M adhesive 200MP provide.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | for 30 mins |
3M Scotch® 232 High Performance Masking Tape Scotch® High Performance Masking Tape 232 is designed to be used in medium temperature paint bake operations.Information provided by 3M |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | Intermittent |
Saint-Gobain Korel® K30-20 Soft Micro-cellular Polyurethane Foam Description: The Korel® series micro-cellular polyurethane foams are offered in a broad range of properties, making them ideal for a variety of gasketing and energy absorption needs. Korel® microc.. |
|||
Maximum Service Temperature, Air | 121 °C | 250 °F | |
Master Bond EP30M4LV Chemically Resistant, Low Viscosity Adhesive Description: Master Bond EP30M4LV is a two component, low viscosity epoxy system for high performance bonding, sealing and encapsulation. This system features a forgiving 100 to 60 mix ratio by weig.. |