Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Resinlab® EP1285HD-16 Highly Filled, Medium Viscosity Casting Resin Resinlab™ EP1285 (Formerly Lab Product W021901 series) is a highly filled, medium viscosity black casting resin designed for applications requiring a high degree of thermal conductivity and a low C.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 132 (SO) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 184M (SO) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 675A(IF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 719L (RL) Rheolube Grease Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 737B (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Recommended |
Nye Lubricants 774L (NG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Maximum operating temperature continuously for 5000 hours based on a tensile stress of 50% at 23° C. |
Omnia Plastica PC Polycarbonate This amorphous polymer is commonly used for its high shock resistance even at low temperature. It is not a material recommended for mechanical applications, even if its dimensional stability does ma.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Deflection Temp.; ASTM D648 |
NCMT NanoPAC™ HS403 High Performance Polypropylene Nanocomposite Applications: Electrical AppliancesInformation provided by Nano Composite Materials Technology Limited |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Precision Polymer Engineering N70F Nitrile Rubber Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. Copolymer of acrylonitrile and butadiene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration .. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | 20,000 hr; IEC 216 |
Nilit Nilamid A G5 FR PH2 25% Glass Fiber Reinforced, Flame Retardant PA66 (with Red Phosphorous) Description: Nilamid A G5 FR PH2 combines flame retardancy with outstanding mechanical performance. This product has a complete yellow card, with RTI and CTI listings. The formulation has been optim.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Resin Technology Group TIGA 202-EX High Performance, Fast Cure Adhesive Mix ratio 2 to 1 by volume.TIGA 202-EX is a two-part epoxy adhesive offering outstanding shear tensile and peel adhesion. TIGA 202-EX offers a 20 minute pot life and good hardness development within.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Cured |
Resin Technology Group UV-406 High Clarity, Moisture Resistant, UV Curing Bonder UV 406 is a rapidly curing UV adhesive developed for use in bonding a variety of plastics, glass and metals, where moisture resistance and low shrinkage during cure is critical. Bond strengths on po.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous; FRISETTA Test Method |
Nilit FRIANYL B63 HH Nylon 6 for injection molding Nylon 6 for injection molding, heat and hydrolysis stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous; FRISETTA Test Method |
Nilit FRIANYL B63 HH-GV30 Nylon 6 for injection molding, 30% glass fiber reinforced Nylon 6 for injection molding, heat and hydrolysis stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | short term |
Lehmann & Voss LUVOCOM® 3-8266 Polyamide 6, unreinforced Applications: Automotive industry, textile machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteristics.Reduce.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
LATI Latilon 28D PC Polycarbonate (PC). Unfilled. Low smoke density and low toxicity index. Very high dimensional stability. Very good surface appearanceAvailability: Africa & Middle East; Asia Pacific; Europe; Latin A.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Lehmann & Voss LUVOCOM® 1/XCF/25 Polyamide 66, with carbon fiber, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.High-strength and high-stiff parts; low coefficient of expansion.Reduced moment of inertia comp.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous |
Schwartz Technical Plastics OPTAMID® Cast Polyamide 6, Dry Application: deflection rope sheaves for elevatorsInformation provided by Schwartz Technical Plastics GmbH |
|||
Maximum Service Temperature, Air | 120 - 140 °C | 248 - 284 °F | medium time operation |
Zell-Metall Engineering Plastics Zellamid 1115 By special additives, impact strength and abrasion resistance are further improved. We particularly recommend this material for slipper pads for rolling mills.Color: IvoryApplications: slipper pads .. |
|||
Maximum Service Temperature, Air | 120 - 130 °C | 248 - 266 °F | Epoxy Matrix Limit |
Hexcel® HexPly® M42 180°C (350°F) Curing Epoxy Matrix, 50%/G939 HS Carbon Information provided by HexCel |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Trelleborg E645 EPDM Rubber EPM -- EPDM or Ethylene -- Propylene Rubber. EPM can only be vulcanized by peroxides or radiation; whereas EPDM can be vulcanized conventionally using sulphur.Properties:Excellent inherent high and .. |
|||
Maximum Service Temperature, Air | 120 - 130 °C | 248 - 266 °F | long term; EMS |
EMS-Grivory Grivory® TSGL-40/4 black 9833 PA666-GF40 Product description: Grilon TSGL-40/4 black is based on a heat stabilized semicrystalline Polyamide PA66+PA6 and 40% long glass fibers. Grilon TSGL-40/4 black is characterized by the following key-p.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | short term (Cured condition) |
Dow BETAMATE™ 7200 Polyurethane Prepolymer BETAMATE™ 7200 is a one component moisture curing polyurethane seam sealant with permanent elasticity and good adhesion to different substrates. It is an excellent seam sealer for body repair. It.. |
|||
Maximum Service Temperature, Air | 120 °C @Time 7.20e+7 sec |
248 °F @Time 20000 hour |
Relative Temperature Index; IEC 216/1 |
Bond Laminates TEPEX® dynalite 102-RG600(x)/47% Roving Glass – PA 6 Consolidated Composite Laminate Within the TEPEX® composite laminate, Polyamide 6 is a resin known for its toughness, stiffness, abrasion resistance, heat and chemical resistances. Roving E-Glass fibers have an excellent impact .. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Short Term |
3M 9086 High Performance Double Coated Tapes with Adhesive 375 3M™ Double Coated Tapes with 3M™ Adhesive 375 provides a high level of adhesive peel and shear performance. The adhesive system used on these products provides good adhesion to both high and low s.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
Trelleborg B668 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | Short peaks operation |
Polyram RamOfin PPC359T4 Polypropylene, 20% Mineral Filled 20% mineral filled, heat stabilized and impact modified for polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 120 °C | 248 °F | |
LATI Latene® 9H TES/30 PP Homopolymer, Heat Stabilized Polypropylene homopolymer (PPh) based compound. Heat stabilized. Aesthetic talc.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Ind.. |