Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 60.0 °C |
111 µin/in-°F @Temperature 73.4 - 140 °F |
|
Murtfeldt Material ”S”® 1000 RB Polyethylene, High Friction An elastomer in Material ”S”® 1000 RB gives it high impact resistance and skid resistance.Special Properties:• High coefficient of friction• Good wear and abrasion resistanceInformation provide.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 53752 |
Okulen® 1000 - REG PE Colored OKULEN® 1000 is an ultra high molecular low pressure polyethylene with a molecular weight of < 3.5 g/mol. It has great wear resistance, high impact strength, and excellent sliding properties ideal .. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 53752 |
Okulen® 1000 PE-UHMW, Natural OKULEN® 1000 is an ultra high molecular low pressure polyethylene with a molecular weight of < 3.5 g/mol. It has great wear resistance, high impact strength, and excellent sliding properties ideal .. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 53752 |
Okulen® 2000 PE-UHMW, SG OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 53752 |
Okulen® 2000 PE-UHMW, SL OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 60.0 °C |
111 µin/in-°F @Temperature 73.4 - 140 °F |
|
Omnia Plastica PE 300 - Polyethylene 300 Molecular weight 300,000 polyethylene similar to the type 500 with higher rigidity and lower resistance to continuous shocks. The applications are similar to those of PE 500, being more commonly spe.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 60.0 °C |
111 µin/in-°F @Temperature 73.4 - 140 °F |
|
Omnia Plastica PE 500 - Polyethylene 500 Polyethylene with a molecular weight of ± 500,000. PE 500 is more rigid than the high molecular weight polyethylene and it is therefore more suitable for mechanical applications. The friction coeff.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 100 °C |
111 µin/in-°F @Temperature 73.4 - 212 °F |
|
Quadrant EPP TIVAR® 1000 antistatic PE-UHMW + carbon black (ISO Data) By incorporating an effective carbon black grade, TIVAR 1000 antistatic offers the electrostatic dissipative properties often required for PE-UHMW components operating at high line speeds and convey.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 100 °C |
111 µin/in-°F @Temperature 73.4 - 212 °F |
|
Quadrant EPP TIVAR® 1000 ASTL PE-UHMW + specific additives (ISO Data) TIVAR 1000 ASTL, based on a PE-UHMW grade with extremely high molecular weight, has been specifically developed for tough anti-abrasion applications. TIVAR 1000 ASTL shows a higher wear and abrasion.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 100 °C |
111 µin/in-°F @Temperature 73.4 - 212 °F |
|
Quadrant EPP TIVAR® 1000 EC PE-UHMW + specific additives (ISO Data) TIVAR 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 antistatic, improving electrical conductivity and UV-resistance |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 100 °C |
111 µin/in-°F @Temperature 73.4 - 212 °F |
|
Quadrant EPP TIVAR® Oil Filled PE-UHMW + oil (ISO Data) TIVAR Oil Filled is a self-lubricating PE-UHMW material in the real meaning of the word. Next to an enhanced wear resistance, the incorporated and evenly dispersed oil renders this material a consid.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
ISO 11359-2 |
Polymer Industries Polyslick UHMW Sheet Polyslick UHMW Sheet exhibits the properties of excellent impact strength, abrasion resistance, low coefficient of friction, as well as very good chemical resistance. This industrial grade material .. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
3M Dyneon™ Fluorel™ FE-5621Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series O-ring grades are the c.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
3M Dyneon™ Fluorel™ FE-5622Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series grades are Dyneon's cle.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
3M Dyneon™ Fluorel™ FC-2144 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Higher viscosity version of FC-2123. .. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
3M Dyneon™ Fluorel™ FC-2152 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Improved hot tear over FC-2176. Sugg.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
3M Dyneon™ Fluorel™ FG-5630Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. When compared to other food grade Dia.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 53752 |
Okulen® 2000 PE-UHMW, OF OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
ISO 11359-2 |
Polymer Industries Polyslick UHMW Profile Polyslick UHMW Profiles exhibit all of the durable qualities of our Polyslick UHMW Sheet making them perfect for use where sheet stock is not suitable. Polymer Industries offers a large variety of p.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
ASTM E-831 |
DSM Biomedical PurSil® AL 5 Aliphatic Thermoplastic Silicone Polyether Urethane
(discontinued **) PurSil® AL is a family of aliphatic, thermoplastic silicone polyether urethane copolymers. These polymers are formed by the incorporation of silicone in the polymer backbone together with polyether.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
LyondellBasell Petrothene® PR92735 Linear Low Density Polyethylene ApplicationsPETROTHENE PR 92735 is a high molecular weight, linear low density-based compound designed for cable jacketing. PR 92735 contains a nominal carbon black content of 2.6% and antioxidant .. |
|||
CTE, linear | 200 µm/m-°C @Temperature 23.0 - 80.0 °C |
111 µin/in-°F @Temperature 73.4 - 176 °F |
|
Mikro-Technik Mikrolen UHMW-PE Properties: very good impact resistance / high absorption at shock and impact stress extremely high resistance against abrasive wear good corrosion resistance highly resistant at temperatures of -26.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | DIN 52328 |
Isoflon PEHD 500 High Density Polyethylene Products with excellent friction, anti-stick, abrasion and chemical inertia characteristicsVery good impact resistanceNo moisture regainProduct for the food industryInformation provided by Isoflon. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
Momentive Performance Materials RTV88 Red Extreme High Temperature Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | Above Tg |
Tra-Con Tra-Bond 293-14 Electrically Conductive Silver-Filled Epoxy Adhesive TRA-BOND 293-14 silver-filled, electrically conductive epoxy adhesive is designed to provide strong bonds to difficult-to-bond metals, such as nickel, copper, gold and solder. The stress-absorbing c.. |
|||
CTE, linear | 200 µm/m-°C @Temperature 20.0 °C |
111 µin/in-°F @Temperature 68.0 °F |
|
Tra-Con Tra-Bond 813J01 Silicone Encapsulant TRA-BOND 813J01 is a silicone adhesive system formulated to provide excellent thermal conductivity. This unique product bonds well to difficult substrates. Typical applications include encapsulation.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | Above Tg |
Epoxy Technology EPO-TEK® T7109-18 Electrically Insulating Epoxy Paste Material Description: A flexible, electrically insulating epoxy paste designed for low stress and heat dissipation applications. Alternative to EPO-TEK® T7109-17.Information Provided by Epoxy Tec.. |
|||
CTE, linear | 200 µm/m-°C | 111 µin/in-°F | |
Hippe PTFE Good chemical resistance. High thermal stability. Flame resistance. Lowest coefficient of friction among all solid plastics. Very good dielectric properties. Very high weathering resistance.Info.. |