Polymer Property : Melting Point = 245 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Thermal Properties	Metric	English	Comments
Melting Point	245 °C	473 °F	DSC, 10°C/min.; ISO 11357-1/-3
Quadrant EPP Ertalyte® PET, cast (ISO Data) The specific properties of this virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts which have to sustain high loads and/or are subject to wear.
Melting Point	245 °C	473 °F	ISO 1135 7-1-3
Radici Radilon® CAHS (dry) Copolyamide 66/6 General purposeInformation provided by Radici group.
Melting Point	245 - 247 °C	473 - 477 °F	PEPL-10-W-19
Pearl Engineering PEPLPET B-109JS PET Sheet Grade Used mainly for 5 to 20 liter mineral water containers
Melting Point	245 °C	473 °F	ISO 11357-1
Murtfeldt Murylat® Polyethylene Terephthalate Thanks to its extremely low absorption of moisture and low expansion coefficient, Murylat® is ideally suited for the processing of precision parts. Murylat® has an extremely high hardness grade an..
Melting Point	245 °C	473 °F	Crystalline Peak Melting Point; ASTM D3418
Eastman Aqua 18696 PET (discontinued **) Voridian Aqua thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. Containers made from 186..
Melting Point	245 °C	473 °F	ASTM D3418
Custom Resins Vexel™ E20GF15 , 15% Glass Reinforced PET (discontinued **) Description: Vexel™ E20GF15 is a 15% glass fiber reinforced, general purpose PET. Information provided by Custom Resins.
Melting Point	245 °C	473 °F	ASTM D3418
Custom Resins Vexel™ E20GF45 , 45% Glass Reinforced PET (discontinued **) Description: Vexel™ E20GF45 is a 45% glass fiber reinforced, general purpose PET. Information provided by Custom Resins.
Melting Point	245 °C	473 °F	ASTM D3418
Custom Resins Vexel™ E20GF45 FR , 45% Glass Reinforced, Flame Retardant PET (discontinued **) Description: Vexel™ E20GF45 FR is a 45% glass fiber reinforced, flame retardant PET. Information provided by Custom Resins.
Melting Point	245 - 255 Â°C	473 - 491 Â°F
Indium Corp. IndalloyÂ® 233 Pb-Sb-Sn Solder Alloy Intermediate temp solder. Creep resistant.Information provided by the manufacturer, Indium Corporation.
Melting Point	245 Â°C	473 Â°F
Solvay TECHNYLÂ® B 52 G1 MX 35 (XA 3004) PA66/6 Description: TECHNYL B 52 G1 MX35 is a copolyamide 6.6/6 , with thermal protection, glow wire resistant and reinforced with mineral filler.Colors: GreyAvailable in: Latin AmericaMain Properties: ? G..
Melting Point	245 °C	473 °F	ISO 3146
Wellman Wellpet® PR109-N1 Unfilled PET Description: Unfilled PETInformation provided by Wellman.
Melting Point	<= 245 °C	<= 473 °F	Peak Melting Point; ExxonMobil method
ExxonMobil Exceed™ 1018HA Metallocene Polyethylene Resin Product Description: Exceed 1018HA is a metallocene ethylene-hexene copolymer. Films made from Exceed 1018HA have outstanding tensile, impact strength and puncture. These superior strength propertie..
Melting Point	<= 245 °C	<= 473 °F	Peak Melting Point; ExxonMobil method
ExxonMobil Exceed™ 1018HA Metallocene Polyethylene Resin (European Grade) Product Description: Exceed 1018HA is a metallocene ethylene-hexene copolymers. Films are made of Exceed 1018HA have outstanding tensile, impact strength and puncture. These superior strength proper..
Melting Point	245 - 255 °C	473 - 491 °F
Daikin NEOFLON NP-3000 FEP Pellets NEOFLON FEP molding materials are supplied as translucent white pellets for melt flow processes.Processing Methods: Extrusion.Applications: Ultra high speed wire and cable coatings.Information provi..
Melting Point	245 °C	473 °F	ASTM Test
BASF Petra® 130 30% Glass Filled PET Petra 130 is a 30% glass fiber reinforced polyethylene terephthalate (PET) for injection molding applications. It exhibits a good combination of performance properties including high strength and s..
Melting Point	245 °C	473 °F	10 K/min
BASF Petra® 130 BK-112 30% Glass Filled PET Petra 130 BK-112 is a 30% glass fiber reinforced, black pigmented polyethylene terephthalate injection molding compound. It exhibits a combination of performance properties including good strength ..
Melting Point	245 °C	473 °F	ASTM Test
BASF Petra® 130 BK-112 30% Glass Filled PET Petra 130 BK-112 is a 30% glass fiber reinforced, black pigmented polyethylene terephthalate injection molding compound. It exhibits a combination of performance properties including good strength ..
Melting Point	245 °C	473 °F	10 K/min
BASF Petra® 130 FR 30% Glass Filled PET Petra 130 FR is a 30% glass fiber reinforced, flame retardant injection molding polyethylene terephthalate feedstocks. It is recognized as UL 94V-0/5VA by Underwriters Laboratories. It is also avail..
Melting Point	245 °C	473 °F	ASTM Test
BASF Petra® 130 FR BK-112 30% Glass Filled PET Petra 130 FR BK-112 is a 30% glass fiber reinforced, black pigmented, flame retardant injection molding compound based on post-consumer and post-industrial recycle polyethylene erephthalate feedstoc..
Melting Point	245 °C	473 °F	10 K/min
BASF Petra® 140 BK-112 45% Glass Filled PET Petra 140 BK-112 is a 45% glass reinforced, pigmented black, polyethylene terephthalate (PET) injection molding compound offering an increased level of strength, stiffness, high temperature performa..
Melting Point	245 °C	473 °F	ASTM D3418
BASF Petra® 7010 WT 7729 15% Glass Filled PET Description: Petra 7010 WT7729 is a 15% glass fiber reinforced, pigmented white injection molding compound based on post-consumer recycle polyethylene terephthalate. Formulated for superior surface ..
Melting Point	245 °C	473 °F	10 K/min
BASF Petra® 7030 GY6128 30% Glass Filled PET Petra 7030 GY6128 is a grey pigmented, high flow 30% glass fiber reinforced injection molding compound based on post-consumer and post-industrial recycled polyethylene terephthalate feedstock. It o..
Melting Point	245 °C	473 °F	ASTM D3418
Ashley Polymers Ashlene® E126 PET Polyester, 30% Glass Reinforced PET Polyester, economy grade with 30% glass reinforcement.Data provided by the manufacturer
Melting Point	245 °C	473 °F	ISO 11357-1
Murtfeldt Murylat® SP Polyethylene Terephthalate Murylat® SP combines the properties of Murylat® with improved wear and friction characteristics. It also has increased dynamic resilience which, for example, significantly reduces the required dri..
Melting Point	245 °C	473 °F	ASTM D3418
Ashley Polymers Ashlene® PE126 PET Polyester, 30% Glass Reinforced PET Polyester, with 30% glass reinforcement.Data provided by the manufacturer
Melting Point	245 °C	473 °F	ASTM Test
BASF Petra® 230 BK-112 22/13% Glass/Mineral Filled PET Petra 230 BK-112 is a 35% mineral and glass fiber reinforced, black pigmented, polyethylene terephthalate injection molding compound. It exhibits a very good combination of performance properties in..
Melting Point	245 - 255 °C	473 - 491 °F	Average value: 251 °C Grade Count:25
Overview of materials for Polyethylene Terephthalate (PET), Glass Fiber Filled, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polyethylene Terephthalate (PET), Glass Fiber Filled, Flame Retardant". Each property range of values re..
Melting Point	245 °C	473 °F	Crystalline Peak Melting Point; ASTM D3418
Eastman 9921W PET Injection Molded (discontinued **) Voridian PET 9921W is a copolymer PET. Typical applications include containers for automotive parts, household products, and pharmaceutical and food packaging. Voridian PET thermoplastic polyesters ..
Melting Point	245 °C	473 °F	ASTM D3418
Custom Resins Vexel™ E20GF30 FR , 30% Glass Reinforced, Flame Retardant PET (discontinued **) Description: Vexel™ E20GF30 FR is a 30% glass fiber reinforced, flame retardant PET. Information provided by Custom Resins.