Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants 167B (SO) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants 361F (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants 361F-BK (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants NYEOIL II Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S60B Silicone Rubber Black Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States F.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S60G Silicone Rubber Green Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States F.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S60T Silicone Rubber Translucent Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United St.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S60Z Silicone Rubber Grey Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fo.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S65W Silicone Rubber Low Compression Set, Off-white Silicone Rubber, 65-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Low c.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S65Y Silicone Rubber Golden Yellow, Silicone 55-65 °IRHD. Diesel liner ring grade. ASTM & ISO designation = VMQ.Applications: Excellent heat resistance and low temperature flexibility combined with low compression set.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S70Z Silicone Rubber Grey Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fe.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group 1161 Oxy-Bond™ Two-Component Epoxy Adhesive Oxy-Bond and Millenium Adhesive SystemsEngineered for strength, durability, lightness, and formability, our Oxy-Bond and Millenium lines offer adhesives with physical and electrical properties to ma.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group DPE080697-1 Two component Potting Compound Resin Technology Group DPE080697-1 Two component Potting CompoundClear, 2 part, UV/Heat/Room temperature cure epoxy potting compound. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group FDA-24N Two component Polyurethane Adhesive Resin Technology Group FDA-24N Two component Polyurethane AdhesiveFDA approvable, 1:1 ratio, general purpose adhesive |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group TIGA 202-EX High Performance, Fast Cure Adhesive Mix ratio 2 to 1 by volume.TIGA 202-EX is a two-part epoxy adhesive offering outstanding shear tensile and peel adhesion. TIGA 202-EX offers a 20 minute pot life and good hardness development within.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Fujipoly Industries Sarcon® 30U Thin-Film UR Sarcon UR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
Momentive Performance Materials RTV123 Black Adhesive Sealant, General Purpose Paste One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: General purpose for bonding .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
Momentive Performance Materials TSE392 Translucent Adhesive Sealant, Thixotropic Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive adhes.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond 2122 Metal Repair Aluminum Epoxy Adhesive TRA-BOND 2122 is a versatile aluminum metal filled epoxy formulation developed for modern industrial casting, bonding and repair applications where a strong aluminum-like adhesive is required. This .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond FS443 Color Keyed Thixotropic Epoxy Adhesive TRA-BOND FS443 is a fast cure, high viscosity, two-component epoxy formulation that signals both proper mixing and curing when bonding fiber optic bundles, potting glass fibers, and/or terminating s.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond 2137 Easy-Flow No-Sag Epoxy Adhesive TRA-BOND 2137 epoxy adhesive is an easy-to-apply, room temperature cure epoxy adhesive system developed for structural bonding applications on vertical or overhead surfaces where its instant develop.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 049 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Atom Adhesives AA-BOND 428 Epoxy Adhesive AA-BOND 428 is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. AA-BOND 428 contains .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ Super G 948 SEBS Thermoplastic Elastomer Evoprene™ Super G compounds are high performance styrene ethylene- butylene styrene based thermoplastic elastomers. Evoprene™ Super G has improved heat resistance and improved recovery properties.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond 2138 Easy-Flow No-Sag Epoxy Adhesive TRA-BOND 2138 epoxy adhesive is an easy-to-apply, room temperature cure epoxy adhesive system developed for structural bonding applications on vertical or overhead surfaces where its instant develop.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 075 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 081 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 084 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 - -40.0 °C | -76.0 - -40.0 °F | |
AlphaGary Evoprene™ G 991 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |
|||
Minimum Service Temperature, Air | -60.0 - -50.0 °C | -76.0 - -58.0 °F | |
AlphaGary Evoprene™ GC 5683 SEBS Thermoplastic Elastomer Evoprene™ GC compounds are based on styrene ethylene- butylene styrene block copolymers. Evoprene™ GC series was created to provide cost effective solutions for processors and end users alike. Can.. |