Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 151 °C | 304 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® 134R PC (Europe-Africa-Middle East) LEXAN 134R is a high viscosity grade especially suited for injection blow moulding. FDA food contact compliant in limited colors. Effective January 15th, 2007 this grade will no longer be supported.. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 923 PC (Asia Pacific) Opaque colors, low viscosity, superior flame retardance. Decreased smoke and lowered toxic gas emission. UV-stabilized. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 923A PC Low viscosity, flame retardant with exceptional surface. Clear, tints and opaque colors. UV-stabilized. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 923ASR PC More robust design of standard 900 series flame retardant grade. Internal mold release. UV-stabilized. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 940ASR PC (Asia Pacific) More robust design of standard 900 series flame retardant grade. Internal mold release. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 943ASR PC More robust design of standard 900 series flame retardant grade. Internal mold release. UV-stabilized. |
|||
Vicat Softening Point | 151 °C @Load 5.001 kg |
304 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYform POM C M90 LE Polyoxymethylene, Low Emission Information provided by Polykemi AB |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® 4301 PPC+PC Lexan 4301 is a high heat resistant poly (ester) carbonate resin for injection moldingThis data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 940A PC Medium viscosity, flame retardant PC. Exceptional surface. Clear, tints and opaque colors. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 943A PC (Asia Pacific) Medium viscosity, superior flame retardance. UV-Stabilized. Clear, tints and opaque colors. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 950A PC (Asia Pacific) Transparent, clear and colors, high viscosity, flame retardant with exceptional surface. |
|||
Vicat Softening Point | 151 °C | 304 °F | ISO 306/A |
Iran Petrochemical (PCC) EP-C 30 R Polypropylene The grade is a heterophasic polypropylene copolymer for injection molding the product offers an excellent balance of stiffness.Application: automotive parts, wells, garden furniture, chair shells an.. |
|||
Vicat Softening Point | 151 °C | 304 °F | ISO 306/A |
Iran Petrochemical (PCC) Moplen EP-YS30RE Polypropylene Moplen EP-YS30RE is a heterophasic polypropylene copolymer designed for extrusion applications where smooth processability and a good balance of mechanical properties are required. Moplen EP-YS30RE.. |
|||
Vicat Softening Point | 151 °C @Load 5.10 kg |
304 °F @Load 11.2 lb |
50°C/hr; ASTM D1525 |
LG Chemical Lupoy 1302HP-09 Polycarbonate Resin Description: LUPOY PC 1302HP-09 resin is designed for extrusion products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Characteristics.. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N; ISO 306 |
Teijin Panlite® G-3410R Glass Fiber Reinforced Polycarbonate Resin GF 10% reinforced and mold release grade, meeting UL 94 V-2.Applications:Mechanical, electric and electronic components that need mechanical property e.g., stiffnessPrecision machinery components th.. |
|||
Vicat Softening Point | 151 °C @Load 5.10 kg |
304 °F @Load 11.2 lb |
Rate A (50°C/h); ISO 306/B50; ASTM D1525 |
Styron CALIBREâ„¢ 200-3 Polycarbonate Resin Overview: CALIBREâ„¢ 200-3 polycarbonate resin is produced in compliance with the US Food and Drugs Administration (FDA) and EU food contact regulation. This resin provides excellent impact resis.. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N; ASTM D1525 |
Styron EMERGEâ„¢ 4310-6 Polycarbonate EMERGEâ„¢ PC 4310-6 advanced resin is high-performance polycarbonate resin offering high heat resistance and maximum toughness. Applications: Consumer Electronics and Information Technology Equ.. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics NORYL PN275F PPE+PS PPE+PS with low mineral loading. High heat, platable applications. NSF approved for water contact applications. |
|||
Vicat Softening Point | 151 °C @Load 5.10 kg |
304 °F @Load 11.2 lb |
Rate A (50°C/h); ASTM D1525; ISO 360/B50 |
Styron CALIBREâ„¢ 300-6 Polycarbonate Resin Overview: CALIBREâ„¢ 300-6 polycarbonate resin offer exceptional impact resistance, heat distortion resistance, and optical clarity as high melt strength for blow molding and sheet applications. .. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N Load; ASTM D1525 |
Styron CALIBREâ„¢ 303-06 Polycarbonate Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N; ASTM D1525 |
Styron CALIBREâ„¢ 893-10 Polycarbonate CALIBREâ„¢ 893-10 resin provides superior ignition resistance in opaque applications. Applications: Portable/cellular phones Pagers Data Enclosures Computer housings, keyboards Structural compo.. |
|||
Vicat Softening Point | 151 °C @Load 5.10 kg |
304 °F @Load 11.2 lb |
Rate A (50°C/h); ASTM D1525 |
Styron CALIBREâ„¢ 893-10 Polycarbonate Resin Overview: CALIBREâ„¢ 893-10 Series provides superior ignition resistance in opaque applications. The CALIBRE 891-10 series products are available in 2 additive packages: CALIBRE 891: Mold release.. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N; ASTM D1525 |
Styron EMERGEâ„¢ 4800-19 Polycarbonate EMERGEâ„¢ 4800-19 advanced resin provides superior ignition resistance in opaque, injection molding applications. Physical properties and process-ability are outstanding for this class of polyca.. |
|||
Vicat Softening Point | 151 °C | 304 °F | 50°C/hr, 50N; ISO 306 |
Teijin Panlite® K-1300Y Standard (mold release/ice color grade) Polycarbonate Resin Extrusion molding, blow molding and thick-wall injection molding grade. It has a improved mold release property and is bluish-tinted to exhibit clear color.Applications:Extruded products such as she.. |
|||
Vicat Softening Point | 151 °C | 304 °F | B/120; ISO R306 |
Samsung Cheil Industries Infino® TP-1020 PC, Unreinforced Transparent Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 151 °C | 304 °F | Loading 1 (10N); ASTM D1525 |
Teknor Apex Sinelec CCB1834 Polypropylene Availability: Africa & Middle East; Latin America; Asia Pacific; South America Features: Electrically Conductive Forms: Pellets Processing Method: Injection MethodInformation Provided by Teknor Apex.. |
|||
Vicat Softening Point | 151 °C | 304 °F | 10 N; ASTM D1525 |
Braskem H 504 XP Bioriented Film Polypropylene Description: H 504XP is a low melt flow rate homopolymer, designed specially for high speed lines of biorented films (BOPP). This product features a broad processing window with high output and regu.. |
|||
Vicat Softening Point | 151 °C | 304 °F | ISO 306/A50 |
Addiplast Addilene PMD 50258 Polypropylene Copolymer For electroplatingInformation provided by Addiplast. |
|||
Vicat Softening Point | 151 °C | 304 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® 940A PC (Asia Pacific) Medium viscosity, flame retardant PC. Exceptional surface. Clear, tints and opaque colors. |
|||
Vicat Softening Point | 151 °C @Load 5.10 kg |
304 °F @Load 11.2 lb |
50°C/hr; ASTM D1525 |
LG Chemical Lupoy 1302HP-07 Polycarbonate Resin Description: LUPOY PC 1302HP-07 resin is designed for extrusion products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Characteristics.. |