Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 89.0 °C @Load 1.00 kg |
192 °F @Load 2.20 lb |
ISO 306/A |
Polimeri Europa Riblene® GM 20 Low Density Polyethylene - Coating Grade Riblene GM 20 is a medium fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GM 20 is suitable for coating applications where a low neck-in is required. Moreover, for its rh.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Cycolac® MG8000SR ABS This data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Cycolac® MG8000SR ABS (Asia Pacific) This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Cycolac® MG8000SR ABS (Europe-Africa-Middle East) This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CY2010 PC+ABS (Europe-Africa-Middle East) Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow for a wide variety of thin wall or large size applicat.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CY5000 PC+ABS (Asia Pacific) Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow for a wide variety of thin wall or large size applicat.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Geloy EXGY30CP ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Geloy FXTW30PE ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | 50N (T° increase = 5°C/h); ISO 306B50 |
Total Lacqrene® 4241 High Impact Polystyrene
(discontinued **) DescriptionLACQRENE® 14240 is a high heat resistance, high impact polystyrene for the extrusion industry. Good mechanical and thermal properties leads to the production of thermoformed articles of.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Chevron Phillips 1006 LDPE Injection Molding Resin
(discontinued **) Resin Type: homopolymerCharacteristics: excellent flexibility, excellent flow, good warping resistance, moderate mold release, moderate ESCRApplications: large housewares, tamper evident snap-on cap.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | Softening Point, R&B; ASTM E-28 |
ExxonMobil Escorene® LD-752 EVA Copolymer for Specialty Applications
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A 28% vinyl acetate copolymer.Applications: Compound viscosity modifier; High flow applications. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Braskem PB 525/64 LDPE Blown Film Extrusion Polyethylene
(discontinued **) 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Automatic packaging of liquids products (FFS). Information provided by Braskem |
|||
Vicat Softening Point | 89.0 °C | 192 °F | |
Eastman Tenite 180A-28(HT) Cellulose Acetate
(discontinued **) 28% Plasticized.ISO data as provided by the manufacturer, Eastman Chemical. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | A; ISO 306 |
FKuR Kunststoff Bio-Flex® F 1130 Compostable PLA Blend The BIO-FLEX® trade name indicates blends of co-polyester and PLA* with, depending on the particular grade, a very high content of natural resource material. BIO-FLEX® does not contain any sta.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | 50°C/h; 10N; 10x10x4mm; ISO 306/A50 |
SYNTHOS Krasten® 137 General Purpose Polystyrene Easy flow. Examples of Application:Injection moulding – cups and containers for the food industry, medical devices, drawing templates.Extrusion – coextrusion, high gloss surface.Synthos wa.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® BF-0670T MABS, Unreinforced Scratch Resistant Scratch resistant material that is used in the exterior of electric products and household appliancesInformation provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 89.0 °C @Load 5.10 kg |
192 °F @Load 11.2 lb |
120°C/h; ASTM D 1525 |
Styrolution PS ESCRimo HIPS Styrolution PS ESCRimo is a high impact polystyrene grade with an improved stress cracking resistance compared to conventional high impact polystyreneHigh ESCR resistanceDeep draw thermoformingUL 94.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Samyang Trihip® B500 High Impact Polystyrene Dimensional stability, electrical properties and weather resistance are excellent.B500 is the non-flame retardant grade.Applications: LCD TV Rear Cover - for high flowOffice Machine Housing (O/A, P.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | 1kg / 120°C; ASTM D1525 |
Supreme Petrochem SP 6530 Antistatic Polystyrene Characteristics Prevents dust patterns due to static charges Eliminates need of coatings Fully colorable Processing Injection molding Extrusion & Forming Applications Meter housings Foodservice .. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | B (50N); ISO 306 |
Borealis Daplen™ FS65T20 Polypropylene Compound 20% Mineral Filled, Detergent Resistant Daplen FS65T20 is a 20% mineral filled polypropylene compound intended for injection molding. FS65T20 has been developed especially for applications requiring high detergent resistance and heat sta.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Toyobo PELPRENE™ P40BU Polyester TPE, Weather-resistant Features: Polyester TPE, Weather-resistantInformation provided by Toyobo. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | JIS-K-6740 |
Denka VINYKON M1610 PVC, M grade for hard injection molding A PVC resin compound offering excellent physical properties and workability. A broad product lineup is available, including hard and soft grades, as well as those for extrusion and injection molding.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | JIS-K-6740 |
Denka VINYKON R5205 PVC, R grade for hard extrusion A PVC resin compound offering excellent physical properties and workability. A broad product lineup is available, including hard and soft grades, as well as those for extrusion and injection molding.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Braskem EB 853/72 LDPE Blown Film Extrusion Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Informatio.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Braskem PB 682 LDPE Blow Molding Polyethylene Description: PB682 is a low density polyethylene (LDPE), produced under high pressure technology. The end products molded with this resin present good dimensional stability and high flexibility.Appl.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Braskem EB 853 LDPE Cast Film Extrusion Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Films for absorbents and diapers (with HDPE and LLDPE); general purpose. Information provi.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Albis Plastics Cellulose Acetate Butyrate B9004 (Odor Mask Added), 22% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ASTM D1525 |
Huntsman PE1158 EVA Film Extrusion
(discontinued **) 1.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | ISO 306A |
Lucite International Elvakon® 4451 Super Low Gloss Acrylic Capstock Coextrusion grade developed to provide high aesthetic control, outstanding weatherability and impact and scratch resistance, the Elvakon® series enables protection of substrates with a durable prot.. |
|||
Vicat Softening Point | 89.0 °C | 192 °F | |
Eastman Tenite 383A-12 CAP Cellulose Acetate Propionate
(discontinued **) 12% Plasticized. ISO data as provided by the manufacturer, Eastman Chemical. |