Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 123 °C | 253 °F | Rate A; ISO 306/A50 |
Premix Thermoplastics PRE-ELEC® PE 1295 PRE-ELEC PE 1295 is a dissipative thermoplastic compound based on PE-HD. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resistance bet.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ISO 306/A50 |
Premix Thermoplastics PRE-ELEC® PE 1299 Conductive Thermoplastic Compound PRE-ELEC® PE 1299 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1299 has a high concentration o.. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® LG9020 PC+ABS Low Gloss Cycoloy. Available only in natural, to be custom color concentrated and UV stabilized at the molding press. |
|||
Vicat Softening Point | 123 °C | 253 °F | 50°C/hr; 50N |
Polimeri Europa KOBLEND HI PD 41 G1 PBT+PC, 5% Glass Fiber
(discontinued **) Symbol according to ISO 1043/1: PBT+PC (GF) Elastomer modified PBT+PC blend reinforced with 5% of glass fibres, a good combination of stiffness, dimensional stability and thoughness. Main applicat.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
NOVA Chemicals Sclair® 96A-UV8D HDPE Extrusion Resin
(discontinued **) Features: Excellent processability, excellent stretchability, superior strength, gel free, excellent UV resistance.Applications: Oriented tapes for industrial woven bags and tarpaulins, monoaxial or.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
LyondellBasell Alathon® M4621 High Density Polyethylene ApplicationsALATHON M 4621 is a copolymer that provides outstanding stress crack resistance and low temperature impact strength. Typical applications include small two-piece engine gas tanks, waste.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
LyondellBasell Petrothene® LB560401 High Density Polyethylene ApplicationsPetrothene LB560401 exhibits good stiffness and environmental stress crack resistance. Typical applications include household chemical and personal care product bottles.Regulatory Status.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
LG Chemical LUTENE-H ME2500 HDPE Description: LUTENE-H ME2500 is mainly intended for injection molding of bottle caps. It has good gas permeability characteristics and high toughness.Applications: Caps for beverage bottlesCAS No. 9.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Ineos T50-2000 HDPE Ineos T50-2000 is a high density, narrow molecular weight polyethylene copolymer intended for applications requiring a glossy surface finish and reasonably good impact strength and rigidity. It is c.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Iran Petrochemical (PCC) 5030UA High Density Polyethylene HD-5030UA is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection molding application requiring very high environmental stress c.. |
|||
Vicat Softening Point | 123 °C | 253 °F | 10N, 50°C/hr; ISO 306 |
SABIC Innovative Plastics SABIC PPCOMPOUND 8620 PP SABIC® PPcompound 8620 is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and good flow with exterior automotive weathering stability. It was origin.. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Xenoy® CL101 PBT+PC (Asia Pacific) Xenoy CL101 is an unfilled, impact modified PC/PBT blend with excellent solvent resistance and low-temperature ductility. It has a proven track record in off-line painted exterior automotive applica.. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics XYLEX X8409AC PC+POLYESTER PC + Polyester, Injection (Blow) Molding, or Extrusion Blow molding grade, Chemical Resistance and Transparency |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics XYLEX X8409AC PC+POLYESTER (Europe-Africa-Middle East) PC + Polyester, Injection (Blow) Molding, or Extrusion Blow molding grade, Chemical Resistance and Transparency |
|||
Vicat Softening Point | 123 °C | 253 °F | ISO 306 |
SIDPEC EGYPTENE® HD 5218 EA HDPE Injection Molding Applications:House waresThin-walled food containersPET bottle base cupInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Noryl PPX PPX615 PPE+PP Good chemical resistance. Designed for a balance of stiffness and practical impact strength.This data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Noryl PPX PPX615 PPE+PP (Asia Pacific) Good chemical resistance. Designed for a balance of stiffness and practical impact strength.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
SCG Chemicals EL-Leneâ„¢ H5615F High Density Polyethylene Film Key Characteristics:High speed processingHigh tensile strengthHigh dart impactLow gel contentGood moisture barrierRecommended Applications: Ultra thin film ( |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Chevron Phillips Marlex® 9503HF High Performance Series HDPE Blow Molding Resin Resin Type: linear copolymerCharacteristics: outstanding ESCR, excellent impact resistance, medium molecular weight distribution, wide range of processing conditions, high melt strength, good pariso.. |
|||
Vicat Softening Point | 123 °C | 253 °F | 0.125 inch, 1 Kg; ASTM D1525 |
Diamond Polymers ASA T-120 Description: ASA Weatherable Polymer, Injection Molding Grade, High Heat ResistanceInformation provided by Diamond Polymers, Inc. |
|||
Vicat Softening Point | 123 °C @Load 1.00 kg, Thickness 3.17 mm |
253 °F @Load 2.20 lb, Thickness 0.125 in |
ASTM D1525 |
Diamond Polymers ASAPC 6040 UV Stabilized Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Dow DMDA-8940 NT 7 High Density Polyethylene Resin DOW DMDA-8940 NT 7 is produced using UNIPOL™ process technology. It is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. Info.. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Dow DOWLEX™ 2027G Linear Low Density Polyethylene For high speed, thin gauge applications Improved stiffness Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a Information provided by Dow |
|||
Vicat Softening Point | 123 °C | 253 °F | |
Dow HDPE 04452N High Density Polyethylene DOW HDPE 04452N resin is a narrow molecular weight distribution copolymer designed to offer good stress crack resistance and stacking strength with excellent impact strength. This resin has moderate.. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Cycoloy® C1100 PC+ABS (Europe-Africa-Middle East) CYCOLOY C1100 is a PC+ABS blend developed to satisfy the demanding application requirements, where optimum combination is needed of superior processing efficiency, excellent ductility also at sub ze.. |
|||
Vicat Softening Point | 123 °C | 253 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Valox® V3900WX PBT+PC (Europe-Africa-Middle East) PBT/PC blend - Unreinforced - Flame Retardant. This is a UV-stabilized grade designed for outdoor enclosure applications requiring UL 746C F1 weatherability performance. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Ineos J50-2000-119 HDPE HDPE J50-2000-119 is a high density, narrow molecular weight polyethylene copolymer intended for applications requiring a glossy surface finish and reasonably good impact strength and rigidity. It i.. |
|||
Vicat Softening Point | 123 °C @Load 1.02 kg |
253 °F @Load 2.25 lb |
Rate B; ASTM D1525 |
Samyang Triel® 5300 Thermoplastic Polyether Ester Elastomer TRIEL® resins offer superior mechanical properties, elasticities, heat and chemical resistance, which allow it to be widely used for electric/electronic equipments, automotive parts and outdoor rec.. |
|||
Vicat Softening Point | 123 °C | 253 °F | A50; ISO 306 |
Breplast Bretene SP Polypropylene / Polyethylene Composite Recovered polypropylene and polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Vicat Softening Point | 123 °C | 253 °F | ASTM D1525 |
Chevron Phillips HiD® 9330T HDPE Natural Pipe Resin
(discontinued **) Resin Type: Gas Phase Linear Hexene CopolymerASTM D 4976 Classification: PE 235, A 54607ASTM D3350 Classification: 335540AApplications: Base resin for use in utility and conduit pipe applications.Da.. |