Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 1.17 GPa | 170 ksi | Tangent; ASTM D790 |
RheTech Products FT4700-01A Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: CladdingsBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Tangent; ASTM D790 |
RheTech Products P250-01 Polypropylene Copolymer, Black Applications: ConsolesConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Tangent; ASTM D790 |
RheTech Products P256-01 Polypropylene Copolymer, Black Applications: Door/trunk scuffConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
Network Polymers NPP 30-0500 A Description: Homopolymer Polypropylene with AntistaticInformation provided by Network Polymers Inc. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Tangent; ASTM D790 |
RheTech Products HP512-01 High Stiffness Polypropylene Copolymer, UV Stabilized, Black Applications: Automotive interior applicationsSeat back trimCenter consolesInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate Butyrate B902 (UV Inhibitor Added), 10% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate Propionate CP801 (UV Inhibitor Added), 12% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
M. Holland Company PP100 Polypropylene Homopolymer, General Purpose High clarityHomopolymerGood melt strengthHigh tensile strengthApplications: Thin-walled partsSheetStrapping |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | D790B |
Ineos 3560 Polypropylene Impact Copolymer This is a special high melt flow, nucleated, high impact copolymer polypropylene for injection molding applications. It offers excellent impact resistance and a high flexural modulus.ApplicationsAu.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | |
Kraton® G1650 + PP blend (10/90) Unmodified polypropylene has high rigidity and good heat resistance, but poor impact resistance, especially at low temperatures. Blending KRATON D and G polymers with PP significantly improves the .. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | 1% Secant, 0.05 in/min; ASTM D790 |
LyondellBasell Pro-faxâ„¢ SD183 Polypropylene Copolymer Description: Pro-faxâ„¢ SD183 medium impact polypropylene copolymer resin is extremely resistant to aging at elevated temperatures in both wet and dry environments. It has an excellent balance of.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
LyondellBasell Petrothene® LB500301 High Density Polyethylene, Blow Molding Grade PETROTHENE LB500301 is a polyethylene resin that exhibits excellent environmental stress crack resistance and is especially designed for heavy duty bottles, such as those containing detergent and ch.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Westlake Plastics Ultra Ethylux® HDPE Ultra Ethylux is made from high density polyethylene resin. This material is a cost effective alternative for a variety of end uses including mild chemical and wear applications. Information provid.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 6502A Blow Molding and Injection Molding Polypropylene Impact CopolymerApplications: Blow molded bottles and containers, blown and cast film applications, and profile extrusions.Formolene 6502A is a medium impact copolymer with an excellent balance of t.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Total PPH 3429 Polypropylene, Injection Molding Grade LTHA injection molding homopolymerLTHA - FINA 3429 is engineered with an LTHA additive system that gives excellent leach resistance in hot/wet environments that contain bleach and laundry detergents.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Clariant Renol PA2SP0003 Nylon 6, High Gloss Data provided by Clariant Masterbatches |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | 0.05 in/min, 1% secant; ASTM D-790A |
Braskem TR3020NT Random Copolymer Polypropylene Description: High flexural modulus, very good mold release. Applications: Suggested uses include extrusion, compression molding, thermoforming. Process: Compression Molding. This resin meets the req.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Secant @ 1% strain; ASTM D-790 |
Bapolene® PP5061 Polypropylene, Injection Grade Bapolene PP5061 is a PP Random Copolymer for injection molding. This resin exhibits good clarity and impact properties. This product meets FDA standards for food contact applications.Applications:.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | Secant @ 1% strain; ASTM D790 |
Bapolene® PP5083 Polypropylene, Injection Grade Bapolene PP 5083 is a clarified PP Random Copolymer for injection molding. This resin exhibits good processing and impact properties. This product meets FDA regulation 21CFR 177.1520 and is suitab.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | 1.3 mm/min, 1% Secant; ASTM D790 |
Amco PRIMATOP PP CO 002-12 RC Clarified Random Copolymer Features:low flowcontainers clarifiersexcellent processingexcellent clarityApplications:bottlescontainersFormer A-Top Polymers product; part of Amco product line since 2013. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Arkema Group Solarkote® P-601 Acrylic PVC Capstock, white, high glossInformation provided by Arkema Group |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate Butyrate B900 (Base Grade), 10% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate Butyrate B9086 (FDA Odor Mask), 10% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate Propionate CP800 (Base Grade), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | SAE J949 |
Azdel SuperLite® SL551400-100 PP Resin Matrix / 55% Glass Fiber (4 mm Molded Thickness) AZDEL SuperLite® SL551400-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
Chase Plastics CP Pryme® PPC100-35M Polypropylene Copolymer Information provided by Chase Plastics. |
|||
Flexural Modulus | 1.17 GPa | 170 ksi | 0.05 in/min, 1% secant; ASTM D-790A |
Braskem TI6500WV High Impact Copolymer Polypropylene Description: High melt flow, superior low temperature impact, nucleated, good mold release, antistatic.Applications: Suggested uses include compounding, furniture, toys, packaging, large part inject.. |